Quality Engineer
Posted on Sep 19, 2024 by CV-Library
Laindon, Essex, United Kingdom
Engineering
Immediate Start
£18 - £22 Hourly
Full-Time
Contek Recruitment are currently working with a precision engineering client, located in Basildon, Essex. They are in a period of growth and investment at the moment, and are now looking for an experienced Quality Engineer to join their team on a full-time, permanent basis.
Our client, established in 1962, is a AS9100 and BS EN ISO9001 certified supplier for precision machined components. They are a quality-focused, aerospace-approved precision engineering specialist that off a “single stop” supply source to the Aerospace, Defence, Marine, Automotive, Oil & Gas, Space, and Telecommunication sectors
Purpose:
To act as the quality shopfloor development engineer for the company, ensuring a robust repeatable engineering method/process is followed and be responsible for process quality inspection checks. To develop process driven operator inspection checks that improve throughput and reduce internal quality issues.
Working Hours: Monday to Friday (08:00 AM until 15:00 PM)
Salary: £18-£22 per hour (Dependent on experience)
Duties and Responsibilities:
General:
* Support shopfloor quality process dimensional measurements.
* Learn and train in current manufacturing methods and processes to help gain understanding of products and help support future development.
* To be responsible for developing process driven operator inspection checks.
* Work with the manufacturing team to ensure a robust repeatable and lean manufacturing methods are followed.
* Maintain safe and healthy work environment by following standards and procedures.
Reporting and Control:
* Support the manufacturing team with their recording & analysis of production data.
* Control of measurement equipment by following operating instructions and calibration requirements.
* Coordinate with management and maintain knowledge of products and their process.
* KPI metric reporting to control inspection bottle necks and throughput.
* KPI metric reporting for internal non-conformance and scrap analysis.
* Rework analysis and reporting.
People and Leadership:
* Develop and maintain positive relations and effectual communication lines with all the team, suppliers, and customers.
* Drive and develop a “whole team approach” which everyone is responsible for the quality of work delivered to next operation and final customer deliveries.
Continuous Improvement:
* Responsible for challenging current working processes based on information from KPI and metrics and be able to present a case for change to management and lead the change process.
* Seek opportunities to update job knowledge where possible.
Requirements:
* Good personal and interpersonal skills, share innovation and process driven techniques with team. Ability to achieve a team vision that inspires and develops operator inspection checks.
* An engineering or manufacturing based qualification.
* A CMM Programming course qualification would be ideal.
* Able to use a wide range of metrology equipment.
* An understanding of all inspection processes including manual and automatic measurement techniques.
* Experience in Standard operating procedures & creation.
* Reading & understanding technical drawings.
* Review of NC’s and identifying root cause.
If you do have any interest in the role, please send your application with an up-to-date CV, I'll take a look and I'll be in touch regarding the next steps
Our client, established in 1962, is a AS9100 and BS EN ISO9001 certified supplier for precision machined components. They are a quality-focused, aerospace-approved precision engineering specialist that off a “single stop” supply source to the Aerospace, Defence, Marine, Automotive, Oil & Gas, Space, and Telecommunication sectors
Purpose:
To act as the quality shopfloor development engineer for the company, ensuring a robust repeatable engineering method/process is followed and be responsible for process quality inspection checks. To develop process driven operator inspection checks that improve throughput and reduce internal quality issues.
Working Hours: Monday to Friday (08:00 AM until 15:00 PM)
Salary: £18-£22 per hour (Dependent on experience)
Duties and Responsibilities:
General:
* Support shopfloor quality process dimensional measurements.
* Learn and train in current manufacturing methods and processes to help gain understanding of products and help support future development.
* To be responsible for developing process driven operator inspection checks.
* Work with the manufacturing team to ensure a robust repeatable and lean manufacturing methods are followed.
* Maintain safe and healthy work environment by following standards and procedures.
Reporting and Control:
* Support the manufacturing team with their recording & analysis of production data.
* Control of measurement equipment by following operating instructions and calibration requirements.
* Coordinate with management and maintain knowledge of products and their process.
* KPI metric reporting to control inspection bottle necks and throughput.
* KPI metric reporting for internal non-conformance and scrap analysis.
* Rework analysis and reporting.
People and Leadership:
* Develop and maintain positive relations and effectual communication lines with all the team, suppliers, and customers.
* Drive and develop a “whole team approach” which everyone is responsible for the quality of work delivered to next operation and final customer deliveries.
Continuous Improvement:
* Responsible for challenging current working processes based on information from KPI and metrics and be able to present a case for change to management and lead the change process.
* Seek opportunities to update job knowledge where possible.
Requirements:
* Good personal and interpersonal skills, share innovation and process driven techniques with team. Ability to achieve a team vision that inspires and develops operator inspection checks.
* An engineering or manufacturing based qualification.
* A CMM Programming course qualification would be ideal.
* Able to use a wide range of metrology equipment.
* An understanding of all inspection processes including manual and automatic measurement techniques.
* Experience in Standard operating procedures & creation.
* Reading & understanding technical drawings.
* Review of NC’s and identifying root cause.
If you do have any interest in the role, please send your application with an up-to-date CV, I'll take a look and I'll be in touch regarding the next steps
Reference: 222352658
https://jobs.careeraddict.com/post/95442908
Quality Engineer
Posted on Sep 19, 2024 by CV-Library
Laindon, Essex, United Kingdom
Engineering
Immediate Start
£18 - £22 Hourly
Full-Time
Contek Recruitment are currently working with a precision engineering client, located in Basildon, Essex. They are in a period of growth and investment at the moment, and are now looking for an experienced Quality Engineer to join their team on a full-time, permanent basis.
Our client, established in 1962, is a AS9100 and BS EN ISO9001 certified supplier for precision machined components. They are a quality-focused, aerospace-approved precision engineering specialist that off a “single stop” supply source to the Aerospace, Defence, Marine, Automotive, Oil & Gas, Space, and Telecommunication sectors
Purpose:
To act as the quality shopfloor development engineer for the company, ensuring a robust repeatable engineering method/process is followed and be responsible for process quality inspection checks. To develop process driven operator inspection checks that improve throughput and reduce internal quality issues.
Working Hours: Monday to Friday (08:00 AM until 15:00 PM)
Salary: £18-£22 per hour (Dependent on experience)
Duties and Responsibilities:
General:
* Support shopfloor quality process dimensional measurements.
* Learn and train in current manufacturing methods and processes to help gain understanding of products and help support future development.
* To be responsible for developing process driven operator inspection checks.
* Work with the manufacturing team to ensure a robust repeatable and lean manufacturing methods are followed.
* Maintain safe and healthy work environment by following standards and procedures.
Reporting and Control:
* Support the manufacturing team with their recording & analysis of production data.
* Control of measurement equipment by following operating instructions and calibration requirements.
* Coordinate with management and maintain knowledge of products and their process.
* KPI metric reporting to control inspection bottle necks and throughput.
* KPI metric reporting for internal non-conformance and scrap analysis.
* Rework analysis and reporting.
People and Leadership:
* Develop and maintain positive relations and effectual communication lines with all the team, suppliers, and customers.
* Drive and develop a “whole team approach” which everyone is responsible for the quality of work delivered to next operation and final customer deliveries.
Continuous Improvement:
* Responsible for challenging current working processes based on information from KPI and metrics and be able to present a case for change to management and lead the change process.
* Seek opportunities to update job knowledge where possible.
Requirements:
* Good personal and interpersonal skills, share innovation and process driven techniques with team. Ability to achieve a team vision that inspires and develops operator inspection checks.
* An engineering or manufacturing based qualification.
* A CMM Programming course qualification would be ideal.
* Able to use a wide range of metrology equipment.
* An understanding of all inspection processes including manual and automatic measurement techniques.
* Experience in Standard operating procedures & creation.
* Reading & understanding technical drawings.
* Review of NC’s and identifying root cause.
If you do have any interest in the role, please send your application with an up-to-date CV, I'll take a look and I'll be in touch regarding the next steps
Our client, established in 1962, is a AS9100 and BS EN ISO9001 certified supplier for precision machined components. They are a quality-focused, aerospace-approved precision engineering specialist that off a “single stop” supply source to the Aerospace, Defence, Marine, Automotive, Oil & Gas, Space, and Telecommunication sectors
Purpose:
To act as the quality shopfloor development engineer for the company, ensuring a robust repeatable engineering method/process is followed and be responsible for process quality inspection checks. To develop process driven operator inspection checks that improve throughput and reduce internal quality issues.
Working Hours: Monday to Friday (08:00 AM until 15:00 PM)
Salary: £18-£22 per hour (Dependent on experience)
Duties and Responsibilities:
General:
* Support shopfloor quality process dimensional measurements.
* Learn and train in current manufacturing methods and processes to help gain understanding of products and help support future development.
* To be responsible for developing process driven operator inspection checks.
* Work with the manufacturing team to ensure a robust repeatable and lean manufacturing methods are followed.
* Maintain safe and healthy work environment by following standards and procedures.
Reporting and Control:
* Support the manufacturing team with their recording & analysis of production data.
* Control of measurement equipment by following operating instructions and calibration requirements.
* Coordinate with management and maintain knowledge of products and their process.
* KPI metric reporting to control inspection bottle necks and throughput.
* KPI metric reporting for internal non-conformance and scrap analysis.
* Rework analysis and reporting.
People and Leadership:
* Develop and maintain positive relations and effectual communication lines with all the team, suppliers, and customers.
* Drive and develop a “whole team approach” which everyone is responsible for the quality of work delivered to next operation and final customer deliveries.
Continuous Improvement:
* Responsible for challenging current working processes based on information from KPI and metrics and be able to present a case for change to management and lead the change process.
* Seek opportunities to update job knowledge where possible.
Requirements:
* Good personal and interpersonal skills, share innovation and process driven techniques with team. Ability to achieve a team vision that inspires and develops operator inspection checks.
* An engineering or manufacturing based qualification.
* A CMM Programming course qualification would be ideal.
* Able to use a wide range of metrology equipment.
* An understanding of all inspection processes including manual and automatic measurement techniques.
* Experience in Standard operating procedures & creation.
* Reading & understanding technical drawings.
* Review of NC’s and identifying root cause.
If you do have any interest in the role, please send your application with an up-to-date CV, I'll take a look and I'll be in touch regarding the next steps
Reference: 222352658
Share this job:
Alert me to jobs like this:
Amplify your job search:
Expert career advice
Increase interview chances with our downloads and specialist services.
Visit Blog