Technical Engineer
Posted on Sep 11, 2024 by CV-Library
Brockworth, Gloucestershire, United Kingdom
Engineering
Immediate Start
Annual Salary
Full-Time
The post holder is responsible for working to strict safety and quality requirements.To support the Technical Engineering Manager
* Promote a culture of working safely by working in a safe manner at all times complying with company Health & Safety and environmental standards.
* To support installations in the facility.
* To support the maintenance team with escalated equipment issues.
* To work within a small team without supervision reporting directly to the Technical Engineering Manager.
* Identifying and carrying out improvements to equipment to improve quality and or efficiency.
* To get involved in any other projects/improvements as and when necessary.
* Contribute to continuous improvement activities, for example submitting suggestions to improve the process flow to increase the production cell efficiency or improve health & safety on the shop-floor.
* Support 5s activities throughout the shop-floor (Sort, set in order, shine, standardise and sustain).
* To follow instructions to ensure maximum effectiveness and to adhere to safety guidelines.
* Actively participate in training and development activities identified for either personal and/or team development advancement.
* To be prepared to undertake and support other reasonable requests made by the Technical Engineering Manager.
Skills & Abilities
Previous busy factory/manufacturing experience is desirable.
Willingness to multi-skill and learn products and processes.
Ability to read and follow written and verbal instructions.
Ability to problem solve in a logical manner.
Robot programming / Setup – Nachi /Fanuc others considered.
Excellent literacy and numeracy.
Understanding of PLC control methods.
Fault finding – electrical wiring drawings understanding & fault finding.
Good knowledge of joining technologies – welding, resistance spot welding, other automated joining beneficial.
Good PC and time management skills.
Must be approachable and flexible.
Must be able to complete tasks to completion with additional hours when required.
Weekend or off shift work will be sometimes required depending on projects.
Minimum of HNC in related discipline
Experience and understanding of robotic programming (Nachi, Motorman, Fanuc systems).
Understanding of Mig automated welding equipment and setup
Understanding of resistance welding equipment and techniques would be advantageous.
Experience of working to deadlines and targets.
Previous experience in an Automation environment is required. Automotive would be advantageous.
Must have an excellent time and attendance record.
Must have a Logical, flexible and self-motivated approach
Eye for detail
Package
25 days holiday + 8 Bank holidays
37.5 hour week worked Monday to Friday.
Permanent contract.
Monthly paid
Company Pension Scheme
Work wear provided
PPE Provided
Free Parking
* Promote a culture of working safely by working in a safe manner at all times complying with company Health & Safety and environmental standards.
* To support installations in the facility.
* To support the maintenance team with escalated equipment issues.
* To work within a small team without supervision reporting directly to the Technical Engineering Manager.
* Identifying and carrying out improvements to equipment to improve quality and or efficiency.
* To get involved in any other projects/improvements as and when necessary.
* Contribute to continuous improvement activities, for example submitting suggestions to improve the process flow to increase the production cell efficiency or improve health & safety on the shop-floor.
* Support 5s activities throughout the shop-floor (Sort, set in order, shine, standardise and sustain).
* To follow instructions to ensure maximum effectiveness and to adhere to safety guidelines.
* Actively participate in training and development activities identified for either personal and/or team development advancement.
* To be prepared to undertake and support other reasonable requests made by the Technical Engineering Manager.
Skills & Abilities
Previous busy factory/manufacturing experience is desirable.
Willingness to multi-skill and learn products and processes.
Ability to read and follow written and verbal instructions.
Ability to problem solve in a logical manner.
Robot programming / Setup – Nachi /Fanuc others considered.
Excellent literacy and numeracy.
Understanding of PLC control methods.
Fault finding – electrical wiring drawings understanding & fault finding.
Good knowledge of joining technologies – welding, resistance spot welding, other automated joining beneficial.
Good PC and time management skills.
Must be approachable and flexible.
Must be able to complete tasks to completion with additional hours when required.
Weekend or off shift work will be sometimes required depending on projects.
Minimum of HNC in related discipline
Experience and understanding of robotic programming (Nachi, Motorman, Fanuc systems).
Understanding of Mig automated welding equipment and setup
Understanding of resistance welding equipment and techniques would be advantageous.
Experience of working to deadlines and targets.
Previous experience in an Automation environment is required. Automotive would be advantageous.
Must have an excellent time and attendance record.
Must have a Logical, flexible and self-motivated approach
Eye for detail
Package
25 days holiday + 8 Bank holidays
37.5 hour week worked Monday to Friday.
Permanent contract.
Monthly paid
Company Pension Scheme
Work wear provided
PPE Provided
Free Parking
Reference: 222151258
https://jobs.careeraddict.com/post/95083127
Technical Engineer
Posted on Sep 11, 2024 by CV-Library
Brockworth, Gloucestershire, United Kingdom
Engineering
Immediate Start
Annual Salary
Full-Time
The post holder is responsible for working to strict safety and quality requirements.To support the Technical Engineering Manager
* Promote a culture of working safely by working in a safe manner at all times complying with company Health & Safety and environmental standards.
* To support installations in the facility.
* To support the maintenance team with escalated equipment issues.
* To work within a small team without supervision reporting directly to the Technical Engineering Manager.
* Identifying and carrying out improvements to equipment to improve quality and or efficiency.
* To get involved in any other projects/improvements as and when necessary.
* Contribute to continuous improvement activities, for example submitting suggestions to improve the process flow to increase the production cell efficiency or improve health & safety on the shop-floor.
* Support 5s activities throughout the shop-floor (Sort, set in order, shine, standardise and sustain).
* To follow instructions to ensure maximum effectiveness and to adhere to safety guidelines.
* Actively participate in training and development activities identified for either personal and/or team development advancement.
* To be prepared to undertake and support other reasonable requests made by the Technical Engineering Manager.
Skills & Abilities
Previous busy factory/manufacturing experience is desirable.
Willingness to multi-skill and learn products and processes.
Ability to read and follow written and verbal instructions.
Ability to problem solve in a logical manner.
Robot programming / Setup – Nachi /Fanuc others considered.
Excellent literacy and numeracy.
Understanding of PLC control methods.
Fault finding – electrical wiring drawings understanding & fault finding.
Good knowledge of joining technologies – welding, resistance spot welding, other automated joining beneficial.
Good PC and time management skills.
Must be approachable and flexible.
Must be able to complete tasks to completion with additional hours when required.
Weekend or off shift work will be sometimes required depending on projects.
Minimum of HNC in related discipline
Experience and understanding of robotic programming (Nachi, Motorman, Fanuc systems).
Understanding of Mig automated welding equipment and setup
Understanding of resistance welding equipment and techniques would be advantageous.
Experience of working to deadlines and targets.
Previous experience in an Automation environment is required. Automotive would be advantageous.
Must have an excellent time and attendance record.
Must have a Logical, flexible and self-motivated approach
Eye for detail
Package
25 days holiday + 8 Bank holidays
37.5 hour week worked Monday to Friday.
Permanent contract.
Monthly paid
Company Pension Scheme
Work wear provided
PPE Provided
Free Parking
* Promote a culture of working safely by working in a safe manner at all times complying with company Health & Safety and environmental standards.
* To support installations in the facility.
* To support the maintenance team with escalated equipment issues.
* To work within a small team without supervision reporting directly to the Technical Engineering Manager.
* Identifying and carrying out improvements to equipment to improve quality and or efficiency.
* To get involved in any other projects/improvements as and when necessary.
* Contribute to continuous improvement activities, for example submitting suggestions to improve the process flow to increase the production cell efficiency or improve health & safety on the shop-floor.
* Support 5s activities throughout the shop-floor (Sort, set in order, shine, standardise and sustain).
* To follow instructions to ensure maximum effectiveness and to adhere to safety guidelines.
* Actively participate in training and development activities identified for either personal and/or team development advancement.
* To be prepared to undertake and support other reasonable requests made by the Technical Engineering Manager.
Skills & Abilities
Previous busy factory/manufacturing experience is desirable.
Willingness to multi-skill and learn products and processes.
Ability to read and follow written and verbal instructions.
Ability to problem solve in a logical manner.
Robot programming / Setup – Nachi /Fanuc others considered.
Excellent literacy and numeracy.
Understanding of PLC control methods.
Fault finding – electrical wiring drawings understanding & fault finding.
Good knowledge of joining technologies – welding, resistance spot welding, other automated joining beneficial.
Good PC and time management skills.
Must be approachable and flexible.
Must be able to complete tasks to completion with additional hours when required.
Weekend or off shift work will be sometimes required depending on projects.
Minimum of HNC in related discipline
Experience and understanding of robotic programming (Nachi, Motorman, Fanuc systems).
Understanding of Mig automated welding equipment and setup
Understanding of resistance welding equipment and techniques would be advantageous.
Experience of working to deadlines and targets.
Previous experience in an Automation environment is required. Automotive would be advantageous.
Must have an excellent time and attendance record.
Must have a Logical, flexible and self-motivated approach
Eye for detail
Package
25 days holiday + 8 Bank holidays
37.5 hour week worked Monday to Friday.
Permanent contract.
Monthly paid
Company Pension Scheme
Work wear provided
PPE Provided
Free Parking
Reference: 222151258
Share this job:
Alert me to jobs like this:
Amplify your job search:
Expert career advice
Increase interview chances with our downloads and specialist services.
Visit Blog