Fitter/Installation Engineer
Posted on Jul 21, 2026 by CV-Library
Bamber Bridge, Lancashire, United Kingdom
Engineering
Immediate Start
£23.9 - £23.9 Hourly
Temporary
Fitter/Installation Engineer
Job Type: Full-time, Temporary until Christmas initially
Location: Preston Lancashire
Salary: £23.90 per hour
Working Hours: Monday to Thursday, 7.00am–4.45pm, with a 30-minute lunch break. 37-hour working week.
About the Role
We are looking for an experienced BPS Fitter / Installation Engineer to join a busy production and installation team. This is a hands-on role supporting the assembly, manufacture and installation of commercial pipework systems, packaged plantrooms, boiler skids and utility cupboard heating systems.
The successful candidate will report to the Production Supervisor and will be confident working from schematic layouts and 3D assembly drawings. You will support high-quality mechanical pipework installation in a factory environment, with occasional work on client sites when required.
Key Responsibilities
Assemble, manufacture and install commercial pipework systems, packaged plantrooms, boiler skids and utility cupboard heating systems.
Read detailed schematic drawings and plan pipe systems and related equipment installations.
Measure, mark, cut, thread and assemble pipework components and systems.
Secure pipework using appropriate fixtures, brackets and clamps.
Work with copper, screwed steel, press-fit and crimped pipework systems.
Repair, maintain and support pipe systems, supports and associated equipment.
Carry out strength and tightness testing on gas and water pipework in line with relevant codes and regulatory standards.
Select and safely use hand tools, mechanical tools and equipment for fabrication, installation and repair work.
Apply safe techniques for the temporary or permanent removal of pipework-related systems or components.
Work effectively with others and contribute to positive working relationships within an engineering construction environment.
Ensure all work complies with health and safety requirements, building regulations, company ISO procedures, CDM regulations, risk assessments, quality plans and departmental operating procedures.
Skills and Experience Required
Time-served mechanical pipefitter, heating engineer or similar background.
NVQ Level 3 in mechanical pipefitting, plumbing, heating or equivalent preferred.
Minimum NVQ Level 2 in pipefitting or a relevant trade discipline.
Working knowledge of commercial heating equipment including boilers, pumps, press units and expansion vessels.
Experience installing commercial pipework systems using copper, screwed steel, press-fit or crimped methods.
Ability to read and interpret schematic layouts and 3D assembly drawings.
Good organisational, communication and interpersonal skills.
CSCS card desirable but not essential.
What We’re Looking For
We are looking for someone who takes pride in their workmanship, understands the importance of safety and quality, and can work confidently as part of an engineering production team. You should be reliable, practical, detail-focused and comfortable working to drawings, procedures and deadlines.
Benefits
£23.90 per hour.
Full-time, temporary opportunity until Christmas initially.
Monday to Thursday working pattern, 7.00am–4.45pm, with a 30-minute lunch break.
Varied work across factory-based manufacture and occasional site installation.
Opportunity to work on commercial heating systems, plantrooms and skid units.
Supportive team environment
Apply Now
If you are an experienced pipefitter, heating engineer or installation engineer looking for your next opportunity, we would like to hear from you. Apply today with your CV and a member of the team will be in touch.
Winsearch acts as an employment agency for contract and permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services
INDWIN
Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!
The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see (url removed) />
Many Thanks
Job Type: Full-time, Temporary until Christmas initially
Location: Preston Lancashire
Salary: £23.90 per hour
Working Hours: Monday to Thursday, 7.00am–4.45pm, with a 30-minute lunch break. 37-hour working week.
About the Role
We are looking for an experienced BPS Fitter / Installation Engineer to join a busy production and installation team. This is a hands-on role supporting the assembly, manufacture and installation of commercial pipework systems, packaged plantrooms, boiler skids and utility cupboard heating systems.
The successful candidate will report to the Production Supervisor and will be confident working from schematic layouts and 3D assembly drawings. You will support high-quality mechanical pipework installation in a factory environment, with occasional work on client sites when required.
Key Responsibilities
Assemble, manufacture and install commercial pipework systems, packaged plantrooms, boiler skids and utility cupboard heating systems.
Read detailed schematic drawings and plan pipe systems and related equipment installations.
Measure, mark, cut, thread and assemble pipework components and systems.
Secure pipework using appropriate fixtures, brackets and clamps.
Work with copper, screwed steel, press-fit and crimped pipework systems.
Repair, maintain and support pipe systems, supports and associated equipment.
Carry out strength and tightness testing on gas and water pipework in line with relevant codes and regulatory standards.
Select and safely use hand tools, mechanical tools and equipment for fabrication, installation and repair work.
Apply safe techniques for the temporary or permanent removal of pipework-related systems or components.
Work effectively with others and contribute to positive working relationships within an engineering construction environment.
Ensure all work complies with health and safety requirements, building regulations, company ISO procedures, CDM regulations, risk assessments, quality plans and departmental operating procedures.
Skills and Experience Required
Time-served mechanical pipefitter, heating engineer or similar background.
NVQ Level 3 in mechanical pipefitting, plumbing, heating or equivalent preferred.
Minimum NVQ Level 2 in pipefitting or a relevant trade discipline.
Working knowledge of commercial heating equipment including boilers, pumps, press units and expansion vessels.
Experience installing commercial pipework systems using copper, screwed steel, press-fit or crimped methods.
Ability to read and interpret schematic layouts and 3D assembly drawings.
Good organisational, communication and interpersonal skills.
CSCS card desirable but not essential.
What We’re Looking For
We are looking for someone who takes pride in their workmanship, understands the importance of safety and quality, and can work confidently as part of an engineering production team. You should be reliable, practical, detail-focused and comfortable working to drawings, procedures and deadlines.
Benefits
£23.90 per hour.
Full-time, temporary opportunity until Christmas initially.
Monday to Thursday working pattern, 7.00am–4.45pm, with a 30-minute lunch break.
Varied work across factory-based manufacture and occasional site installation.
Opportunity to work on commercial heating systems, plantrooms and skid units.
Supportive team environment
Apply Now
If you are an experienced pipefitter, heating engineer or installation engineer looking for your next opportunity, we would like to hear from you. Apply today with your CV and a member of the team will be in touch.
Winsearch acts as an employment agency for contract and permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services
INDWIN
Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!
The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see (url removed) />
Many Thanks
Reference: 225397149
https://jobs.careeraddict.com/post/113588447
Fitter/Installation Engineer
Posted on Jul 21, 2026 by CV-Library
Bamber Bridge, Lancashire, United Kingdom
Engineering
Immediate Start
£23.9 - £23.9 Hourly
Temporary
Fitter/Installation Engineer
Job Type: Full-time, Temporary until Christmas initially
Location: Preston Lancashire
Salary: £23.90 per hour
Working Hours: Monday to Thursday, 7.00am–4.45pm, with a 30-minute lunch break. 37-hour working week.
About the Role
We are looking for an experienced BPS Fitter / Installation Engineer to join a busy production and installation team. This is a hands-on role supporting the assembly, manufacture and installation of commercial pipework systems, packaged plantrooms, boiler skids and utility cupboard heating systems.
The successful candidate will report to the Production Supervisor and will be confident working from schematic layouts and 3D assembly drawings. You will support high-quality mechanical pipework installation in a factory environment, with occasional work on client sites when required.
Key Responsibilities
Assemble, manufacture and install commercial pipework systems, packaged plantrooms, boiler skids and utility cupboard heating systems.
Read detailed schematic drawings and plan pipe systems and related equipment installations.
Measure, mark, cut, thread and assemble pipework components and systems.
Secure pipework using appropriate fixtures, brackets and clamps.
Work with copper, screwed steel, press-fit and crimped pipework systems.
Repair, maintain and support pipe systems, supports and associated equipment.
Carry out strength and tightness testing on gas and water pipework in line with relevant codes and regulatory standards.
Select and safely use hand tools, mechanical tools and equipment for fabrication, installation and repair work.
Apply safe techniques for the temporary or permanent removal of pipework-related systems or components.
Work effectively with others and contribute to positive working relationships within an engineering construction environment.
Ensure all work complies with health and safety requirements, building regulations, company ISO procedures, CDM regulations, risk assessments, quality plans and departmental operating procedures.
Skills and Experience Required
Time-served mechanical pipefitter, heating engineer or similar background.
NVQ Level 3 in mechanical pipefitting, plumbing, heating or equivalent preferred.
Minimum NVQ Level 2 in pipefitting or a relevant trade discipline.
Working knowledge of commercial heating equipment including boilers, pumps, press units and expansion vessels.
Experience installing commercial pipework systems using copper, screwed steel, press-fit or crimped methods.
Ability to read and interpret schematic layouts and 3D assembly drawings.
Good organisational, communication and interpersonal skills.
CSCS card desirable but not essential.
What We’re Looking For
We are looking for someone who takes pride in their workmanship, understands the importance of safety and quality, and can work confidently as part of an engineering production team. You should be reliable, practical, detail-focused and comfortable working to drawings, procedures and deadlines.
Benefits
£23.90 per hour.
Full-time, temporary opportunity until Christmas initially.
Monday to Thursday working pattern, 7.00am–4.45pm, with a 30-minute lunch break.
Varied work across factory-based manufacture and occasional site installation.
Opportunity to work on commercial heating systems, plantrooms and skid units.
Supportive team environment
Apply Now
If you are an experienced pipefitter, heating engineer or installation engineer looking for your next opportunity, we would like to hear from you. Apply today with your CV and a member of the team will be in touch.
Winsearch acts as an employment agency for contract and permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services
INDWIN
Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!
The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see (url removed) />
Many Thanks
Job Type: Full-time, Temporary until Christmas initially
Location: Preston Lancashire
Salary: £23.90 per hour
Working Hours: Monday to Thursday, 7.00am–4.45pm, with a 30-minute lunch break. 37-hour working week.
About the Role
We are looking for an experienced BPS Fitter / Installation Engineer to join a busy production and installation team. This is a hands-on role supporting the assembly, manufacture and installation of commercial pipework systems, packaged plantrooms, boiler skids and utility cupboard heating systems.
The successful candidate will report to the Production Supervisor and will be confident working from schematic layouts and 3D assembly drawings. You will support high-quality mechanical pipework installation in a factory environment, with occasional work on client sites when required.
Key Responsibilities
Assemble, manufacture and install commercial pipework systems, packaged plantrooms, boiler skids and utility cupboard heating systems.
Read detailed schematic drawings and plan pipe systems and related equipment installations.
Measure, mark, cut, thread and assemble pipework components and systems.
Secure pipework using appropriate fixtures, brackets and clamps.
Work with copper, screwed steel, press-fit and crimped pipework systems.
Repair, maintain and support pipe systems, supports and associated equipment.
Carry out strength and tightness testing on gas and water pipework in line with relevant codes and regulatory standards.
Select and safely use hand tools, mechanical tools and equipment for fabrication, installation and repair work.
Apply safe techniques for the temporary or permanent removal of pipework-related systems or components.
Work effectively with others and contribute to positive working relationships within an engineering construction environment.
Ensure all work complies with health and safety requirements, building regulations, company ISO procedures, CDM regulations, risk assessments, quality plans and departmental operating procedures.
Skills and Experience Required
Time-served mechanical pipefitter, heating engineer or similar background.
NVQ Level 3 in mechanical pipefitting, plumbing, heating or equivalent preferred.
Minimum NVQ Level 2 in pipefitting or a relevant trade discipline.
Working knowledge of commercial heating equipment including boilers, pumps, press units and expansion vessels.
Experience installing commercial pipework systems using copper, screwed steel, press-fit or crimped methods.
Ability to read and interpret schematic layouts and 3D assembly drawings.
Good organisational, communication and interpersonal skills.
CSCS card desirable but not essential.
What We’re Looking For
We are looking for someone who takes pride in their workmanship, understands the importance of safety and quality, and can work confidently as part of an engineering production team. You should be reliable, practical, detail-focused and comfortable working to drawings, procedures and deadlines.
Benefits
£23.90 per hour.
Full-time, temporary opportunity until Christmas initially.
Monday to Thursday working pattern, 7.00am–4.45pm, with a 30-minute lunch break.
Varied work across factory-based manufacture and occasional site installation.
Opportunity to work on commercial heating systems, plantrooms and skid units.
Supportive team environment
Apply Now
If you are an experienced pipefitter, heating engineer or installation engineer looking for your next opportunity, we would like to hear from you. Apply today with your CV and a member of the team will be in touch.
Winsearch acts as an employment agency for contract and permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services
INDWIN
Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!
The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see (url removed) />
Many Thanks
Reference: 225397149
Share this job:
Alert me to jobs like this:
Amplify your job search:
Expert career advice
Increase interview chances with our downloads and specialist services.
Visit Blog