Blow Mould Engineer
Posted on Jul 9, 2026 by CV-Library
Tenbury Wells, Worcestershire, United Kingdom
Manufacturing
Immediate Start
£40k - £40k Annual
Full-Time
Blow Mould Engineer
£40,000
Tenbury Wells
Days going on to 2 days 2 nights 7-7
SF Engineering are recruiting a Blow Mould Engineer to support the business in the successful completion of its objectives of quality product delivered cost effectively on time every time.
Blow Mould Engineer Key Responsibilities and Duties:
- Servicing the blowing machines.
- Fault finding.
- Setting up and running all downstream equipment e.g. airveyors , laners , robots.
- Support the Production Manager in the successful completion of their duties.
- Cover other roles within the team as required.
- Take ownership of GMP and health and safety issues in the manufacturing area.
- Completion of Asset Care Tasks
- Completion of Condition Monitoring Tasks
- Drive/support improvement projects within the blow moulding area
- Support for annual overhaul activity
- Train and develop colleagues in processing , fault finding and repair within the blow moulding area
- Mentor Apprentices
Blow Mould Engineer Experience;
- Ability to implement processing changes to affect material distribution , weights and other physical properties/dimensions
- Willingness to learn
- "Can-do" attitude
- Able to motivate and train others
- Able to understand and work to deadlines
- Able to work under pressure
- Knowledge of mould/tooling change procedures and steps/methods for line changes
- Proficient in the use of engineering tools
- Ability to train others
- Able to adjust/set up / keep machinery operating to peak efficiencies to produce bottles based on demand
- Can overhaul machine parts including low/high pressure valves
- Experience of mechanical engineering in a blow moulding environment ideally a time served Mechanical Engineering Apprenticeship (C&G , SVQ or equivalent)
- Electrical knowledge
- Diagnose and repair electrical faults
- PLC - programming , fault finding , control panel wiring
- Ensure compliance with electrical safety standards
- Ability to fault find to component level
- Can work in a team or independently
- Computer literate
- Experience of Krones and Sidel blow moulding machines beneficial
£40,000
Tenbury Wells
Days going on to 2 days 2 nights 7-7
SF Engineering are recruiting a Blow Mould Engineer to support the business in the successful completion of its objectives of quality product delivered cost effectively on time every time.
Blow Mould Engineer Key Responsibilities and Duties:
- Servicing the blowing machines.
- Fault finding.
- Setting up and running all downstream equipment e.g. airveyors , laners , robots.
- Support the Production Manager in the successful completion of their duties.
- Cover other roles within the team as required.
- Take ownership of GMP and health and safety issues in the manufacturing area.
- Completion of Asset Care Tasks
- Completion of Condition Monitoring Tasks
- Drive/support improvement projects within the blow moulding area
- Support for annual overhaul activity
- Train and develop colleagues in processing , fault finding and repair within the blow moulding area
- Mentor Apprentices
Blow Mould Engineer Experience;
- Ability to implement processing changes to affect material distribution , weights and other physical properties/dimensions
- Willingness to learn
- "Can-do" attitude
- Able to motivate and train others
- Able to understand and work to deadlines
- Able to work under pressure
- Knowledge of mould/tooling change procedures and steps/methods for line changes
- Proficient in the use of engineering tools
- Ability to train others
- Able to adjust/set up / keep machinery operating to peak efficiencies to produce bottles based on demand
- Can overhaul machine parts including low/high pressure valves
- Experience of mechanical engineering in a blow moulding environment ideally a time served Mechanical Engineering Apprenticeship (C&G , SVQ or equivalent)
- Electrical knowledge
- Diagnose and repair electrical faults
- PLC - programming , fault finding , control panel wiring
- Ensure compliance with electrical safety standards
- Ability to fault find to component level
- Can work in a team or independently
- Computer literate
- Experience of Krones and Sidel blow moulding machines beneficial
Reference: 225350709
https://jobs.careeraddict.com/post/113534557
Blow Mould Engineer
Posted on Jul 9, 2026 by CV-Library
Tenbury Wells, Worcestershire, United Kingdom
Manufacturing
Immediate Start
£40k - £40k Annual
Full-Time
Blow Mould Engineer
£40,000
Tenbury Wells
Days going on to 2 days 2 nights 7-7
SF Engineering are recruiting a Blow Mould Engineer to support the business in the successful completion of its objectives of quality product delivered cost effectively on time every time.
Blow Mould Engineer Key Responsibilities and Duties:
- Servicing the blowing machines.
- Fault finding.
- Setting up and running all downstream equipment e.g. airveyors , laners , robots.
- Support the Production Manager in the successful completion of their duties.
- Cover other roles within the team as required.
- Take ownership of GMP and health and safety issues in the manufacturing area.
- Completion of Asset Care Tasks
- Completion of Condition Monitoring Tasks
- Drive/support improvement projects within the blow moulding area
- Support for annual overhaul activity
- Train and develop colleagues in processing , fault finding and repair within the blow moulding area
- Mentor Apprentices
Blow Mould Engineer Experience;
- Ability to implement processing changes to affect material distribution , weights and other physical properties/dimensions
- Willingness to learn
- "Can-do" attitude
- Able to motivate and train others
- Able to understand and work to deadlines
- Able to work under pressure
- Knowledge of mould/tooling change procedures and steps/methods for line changes
- Proficient in the use of engineering tools
- Ability to train others
- Able to adjust/set up / keep machinery operating to peak efficiencies to produce bottles based on demand
- Can overhaul machine parts including low/high pressure valves
- Experience of mechanical engineering in a blow moulding environment ideally a time served Mechanical Engineering Apprenticeship (C&G , SVQ or equivalent)
- Electrical knowledge
- Diagnose and repair electrical faults
- PLC - programming , fault finding , control panel wiring
- Ensure compliance with electrical safety standards
- Ability to fault find to component level
- Can work in a team or independently
- Computer literate
- Experience of Krones and Sidel blow moulding machines beneficial
£40,000
Tenbury Wells
Days going on to 2 days 2 nights 7-7
SF Engineering are recruiting a Blow Mould Engineer to support the business in the successful completion of its objectives of quality product delivered cost effectively on time every time.
Blow Mould Engineer Key Responsibilities and Duties:
- Servicing the blowing machines.
- Fault finding.
- Setting up and running all downstream equipment e.g. airveyors , laners , robots.
- Support the Production Manager in the successful completion of their duties.
- Cover other roles within the team as required.
- Take ownership of GMP and health and safety issues in the manufacturing area.
- Completion of Asset Care Tasks
- Completion of Condition Monitoring Tasks
- Drive/support improvement projects within the blow moulding area
- Support for annual overhaul activity
- Train and develop colleagues in processing , fault finding and repair within the blow moulding area
- Mentor Apprentices
Blow Mould Engineer Experience;
- Ability to implement processing changes to affect material distribution , weights and other physical properties/dimensions
- Willingness to learn
- "Can-do" attitude
- Able to motivate and train others
- Able to understand and work to deadlines
- Able to work under pressure
- Knowledge of mould/tooling change procedures and steps/methods for line changes
- Proficient in the use of engineering tools
- Ability to train others
- Able to adjust/set up / keep machinery operating to peak efficiencies to produce bottles based on demand
- Can overhaul machine parts including low/high pressure valves
- Experience of mechanical engineering in a blow moulding environment ideally a time served Mechanical Engineering Apprenticeship (C&G , SVQ or equivalent)
- Electrical knowledge
- Diagnose and repair electrical faults
- PLC - programming , fault finding , control panel wiring
- Ensure compliance with electrical safety standards
- Ability to fault find to component level
- Can work in a team or independently
- Computer literate
- Experience of Krones and Sidel blow moulding machines beneficial
Reference: 225350709
Share this job:
Alert me to jobs like this:
Amplify your job search:
Expert career advice
Increase interview chances with our downloads and specialist services.
Visit Blog