Engineer Technician
Posted on Jun 10, 2026 by CV-Library
Aldershot, Hampshire, United Kingdom
Engineering
Immediate Start
£30k - £36k Annual
Full-Time
An exciting opportunity has arisen for a hands-on, enthusiastic Engineer Technician to join a specialist team designing, building, and installing advanced conveyor and automated handling systems across the UK and internationally.
This is a varied, skilled mechanical engineering role combining workshop-based fabrication with on-site installation and commissioning. You’ll be working with cutting-edge automated systems where precision, problem-solving ability, and practical engineering know-how are essential.
You’ll be part of a collaborative team while also confident working independently, taking ownership of tasks from build through to final commissioning.
Company Benefits:
* Overtime available (typically up to approx. 50 hours per month, not guaranteed)
* Overtime paid at enhanced rates:
* Time + ½ weekdays
* Time + ½ Saturdays
* Double time Sundays
* 22 days annual leave (plus bank holidays), pro-rata in first year
* Standard working week: 37.5 hours (08:00 start, with 30–60-minute lunch break)
* Salary reviews after 3 months and annually thereafter
* Company bonus scheme participation
* Auto-enrolment pension scheme after 3 months service
Key Responsibilities:
* Split working between a workshop environment and customer sites across the UK, with occasional overseas travel (including stays away of up to 2–3 weeks per month depending on project locations)
* Mechanical assembly and setting of conveyor and automation systems using 2D/3D CAD drawings and build schedules
* Fabrication of aluminium extrusion frames, conveyor systems, and safety guarding, installation and setup of pneumatic systems including piping, fittings, and sensor positioning
* Setting and calibrating sensors, preparing equipment for commissioning and software integration testing
* On-site installation work as part of a team, including unloading, positioning, and assembly of equipment to precise specifications and site conditions
* Assisting with cable management systems, frame construction, and guarding installation, supporting service visits including maintenance, warranty work, and breakdown response
* Fault finding, diagnostics, and problem-solving on live systems, with clear communication of findings and solutions
* Producing clear and accurate service reports following site visit, maintaining high standards of quality, presentation, and attention to detail in all work
* Working in a clean, safe, and organised manner at all times
* Collaborating closely with engineering and production teams to support improvements, prototypes, and design feedback while adhering strictly to health & safety procedures and maintaining safe working practices
* Working flexibly to meet deadlines, which may occasionally require longer working hours to complete projects
Experience and Skills Requirements
* Minimum 5 years’ hands-on experience in mechanical engineering, ideally within automation, materials handling, or similar systems
* Strong understanding of mechanical systems and pneumatics
* Confident ability to read and interpret mechanical engineering drawings
* Own set of practical engineering tools
* Full clean UK driving licence
* Strong problem-solving mindset with a practical, “can-do” approach
* Good communication skills and ability to work effectively within a team or independently
* Full product training will be provided
If you have not been contacted within 5 working days, then unfortunately on this occasion your CV has not been shortlisted
This is a varied, skilled mechanical engineering role combining workshop-based fabrication with on-site installation and commissioning. You’ll be working with cutting-edge automated systems where precision, problem-solving ability, and practical engineering know-how are essential.
You’ll be part of a collaborative team while also confident working independently, taking ownership of tasks from build through to final commissioning.
Company Benefits:
* Overtime available (typically up to approx. 50 hours per month, not guaranteed)
* Overtime paid at enhanced rates:
* Time + ½ weekdays
* Time + ½ Saturdays
* Double time Sundays
* 22 days annual leave (plus bank holidays), pro-rata in first year
* Standard working week: 37.5 hours (08:00 start, with 30–60-minute lunch break)
* Salary reviews after 3 months and annually thereafter
* Company bonus scheme participation
* Auto-enrolment pension scheme after 3 months service
Key Responsibilities:
* Split working between a workshop environment and customer sites across the UK, with occasional overseas travel (including stays away of up to 2–3 weeks per month depending on project locations)
* Mechanical assembly and setting of conveyor and automation systems using 2D/3D CAD drawings and build schedules
* Fabrication of aluminium extrusion frames, conveyor systems, and safety guarding, installation and setup of pneumatic systems including piping, fittings, and sensor positioning
* Setting and calibrating sensors, preparing equipment for commissioning and software integration testing
* On-site installation work as part of a team, including unloading, positioning, and assembly of equipment to precise specifications and site conditions
* Assisting with cable management systems, frame construction, and guarding installation, supporting service visits including maintenance, warranty work, and breakdown response
* Fault finding, diagnostics, and problem-solving on live systems, with clear communication of findings and solutions
* Producing clear and accurate service reports following site visit, maintaining high standards of quality, presentation, and attention to detail in all work
* Working in a clean, safe, and organised manner at all times
* Collaborating closely with engineering and production teams to support improvements, prototypes, and design feedback while adhering strictly to health & safety procedures and maintaining safe working practices
* Working flexibly to meet deadlines, which may occasionally require longer working hours to complete projects
Experience and Skills Requirements
* Minimum 5 years’ hands-on experience in mechanical engineering, ideally within automation, materials handling, or similar systems
* Strong understanding of mechanical systems and pneumatics
* Confident ability to read and interpret mechanical engineering drawings
* Own set of practical engineering tools
* Full clean UK driving licence
* Strong problem-solving mindset with a practical, “can-do” approach
* Good communication skills and ability to work effectively within a team or independently
* Full product training will be provided
If you have not been contacted within 5 working days, then unfortunately on this occasion your CV has not been shortlisted
Reference: 225233873
https://jobs.careeraddict.com/post/113392627
Engineer Technician
Posted on Jun 10, 2026 by CV-Library
Aldershot, Hampshire, United Kingdom
Engineering
Immediate Start
£30k - £36k Annual
Full-Time
An exciting opportunity has arisen for a hands-on, enthusiastic Engineer Technician to join a specialist team designing, building, and installing advanced conveyor and automated handling systems across the UK and internationally.
This is a varied, skilled mechanical engineering role combining workshop-based fabrication with on-site installation and commissioning. You’ll be working with cutting-edge automated systems where precision, problem-solving ability, and practical engineering know-how are essential.
You’ll be part of a collaborative team while also confident working independently, taking ownership of tasks from build through to final commissioning.
Company Benefits:
* Overtime available (typically up to approx. 50 hours per month, not guaranteed)
* Overtime paid at enhanced rates:
* Time + ½ weekdays
* Time + ½ Saturdays
* Double time Sundays
* 22 days annual leave (plus bank holidays), pro-rata in first year
* Standard working week: 37.5 hours (08:00 start, with 30–60-minute lunch break)
* Salary reviews after 3 months and annually thereafter
* Company bonus scheme participation
* Auto-enrolment pension scheme after 3 months service
Key Responsibilities:
* Split working between a workshop environment and customer sites across the UK, with occasional overseas travel (including stays away of up to 2–3 weeks per month depending on project locations)
* Mechanical assembly and setting of conveyor and automation systems using 2D/3D CAD drawings and build schedules
* Fabrication of aluminium extrusion frames, conveyor systems, and safety guarding, installation and setup of pneumatic systems including piping, fittings, and sensor positioning
* Setting and calibrating sensors, preparing equipment for commissioning and software integration testing
* On-site installation work as part of a team, including unloading, positioning, and assembly of equipment to precise specifications and site conditions
* Assisting with cable management systems, frame construction, and guarding installation, supporting service visits including maintenance, warranty work, and breakdown response
* Fault finding, diagnostics, and problem-solving on live systems, with clear communication of findings and solutions
* Producing clear and accurate service reports following site visit, maintaining high standards of quality, presentation, and attention to detail in all work
* Working in a clean, safe, and organised manner at all times
* Collaborating closely with engineering and production teams to support improvements, prototypes, and design feedback while adhering strictly to health & safety procedures and maintaining safe working practices
* Working flexibly to meet deadlines, which may occasionally require longer working hours to complete projects
Experience and Skills Requirements
* Minimum 5 years’ hands-on experience in mechanical engineering, ideally within automation, materials handling, or similar systems
* Strong understanding of mechanical systems and pneumatics
* Confident ability to read and interpret mechanical engineering drawings
* Own set of practical engineering tools
* Full clean UK driving licence
* Strong problem-solving mindset with a practical, “can-do” approach
* Good communication skills and ability to work effectively within a team or independently
* Full product training will be provided
If you have not been contacted within 5 working days, then unfortunately on this occasion your CV has not been shortlisted
This is a varied, skilled mechanical engineering role combining workshop-based fabrication with on-site installation and commissioning. You’ll be working with cutting-edge automated systems where precision, problem-solving ability, and practical engineering know-how are essential.
You’ll be part of a collaborative team while also confident working independently, taking ownership of tasks from build through to final commissioning.
Company Benefits:
* Overtime available (typically up to approx. 50 hours per month, not guaranteed)
* Overtime paid at enhanced rates:
* Time + ½ weekdays
* Time + ½ Saturdays
* Double time Sundays
* 22 days annual leave (plus bank holidays), pro-rata in first year
* Standard working week: 37.5 hours (08:00 start, with 30–60-minute lunch break)
* Salary reviews after 3 months and annually thereafter
* Company bonus scheme participation
* Auto-enrolment pension scheme after 3 months service
Key Responsibilities:
* Split working between a workshop environment and customer sites across the UK, with occasional overseas travel (including stays away of up to 2–3 weeks per month depending on project locations)
* Mechanical assembly and setting of conveyor and automation systems using 2D/3D CAD drawings and build schedules
* Fabrication of aluminium extrusion frames, conveyor systems, and safety guarding, installation and setup of pneumatic systems including piping, fittings, and sensor positioning
* Setting and calibrating sensors, preparing equipment for commissioning and software integration testing
* On-site installation work as part of a team, including unloading, positioning, and assembly of equipment to precise specifications and site conditions
* Assisting with cable management systems, frame construction, and guarding installation, supporting service visits including maintenance, warranty work, and breakdown response
* Fault finding, diagnostics, and problem-solving on live systems, with clear communication of findings and solutions
* Producing clear and accurate service reports following site visit, maintaining high standards of quality, presentation, and attention to detail in all work
* Working in a clean, safe, and organised manner at all times
* Collaborating closely with engineering and production teams to support improvements, prototypes, and design feedback while adhering strictly to health & safety procedures and maintaining safe working practices
* Working flexibly to meet deadlines, which may occasionally require longer working hours to complete projects
Experience and Skills Requirements
* Minimum 5 years’ hands-on experience in mechanical engineering, ideally within automation, materials handling, or similar systems
* Strong understanding of mechanical systems and pneumatics
* Confident ability to read and interpret mechanical engineering drawings
* Own set of practical engineering tools
* Full clean UK driving licence
* Strong problem-solving mindset with a practical, “can-do” approach
* Good communication skills and ability to work effectively within a team or independently
* Full product training will be provided
If you have not been contacted within 5 working days, then unfortunately on this occasion your CV has not been shortlisted
Reference: 225233873
Share this job:
Alert me to jobs like this:
Amplify your job search:
Expert career advice
Increase interview chances with our downloads and specialist services.
Visit Blog