Manufacturing Engineer
Posted on May 25, 2026 by CV-Library
Greater Manchester, United Kingdom
Engineering
Immediate Start
£35 - £35 Hourly
Contract/Project
World Class Defence Organisation based in Bolton is currently looking to recruit 4x Manufacturing Engineers.
Rate: £35.00 per hour
Location: Bolton
Contract: 37 Hours per week
Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’
Duration: 12 Months (initially and then ongoing and long-term thereafter)
IR35 status: Inside IR35 (Umbrella)
Manufacturing Engineer Job Description:
As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing.
Compilation and update of Manufacturing Instructions.
Design, Commissioning and proving of associated tooling.
Support the industrial validation process through the use of FMEA’s, FAI’s etc.
Resolution of technical problems that may arise during the manufacturing process.
Route card changes as a result or rework activities.
Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions.
Support to the Non Conformance Process using SAP.
Skills / Experience:
Verification & validation
Design modifications
COMMISSIONING
FMEA’s
Configuration control
Sub-assembly manufacturing
Industrial Validation through the use of FMEA’s, translating design requirements, interpret Design Drawings with a view to producing Manufacturing Build Instructions. Management of Configuration control by the embodiment of Design Modifications,
Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 and level 3 (ONC) OR Formal further education certificate to HNC or equivalent certificate with experience within an engineering discipline
5 years’ experience within an engineering discipline.
Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators.
Have experience of Electronic Sub Assembly manufacture through to System level builds.
Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems.
Must be able to work within and contribute to a team environment.
Recognise and understand customer requirements, and respond to them
Rate: £35.00 per hour
Location: Bolton
Contract: 37 Hours per week
Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’
Duration: 12 Months (initially and then ongoing and long-term thereafter)
IR35 status: Inside IR35 (Umbrella)
Manufacturing Engineer Job Description:
As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing.
Compilation and update of Manufacturing Instructions.
Design, Commissioning and proving of associated tooling.
Support the industrial validation process through the use of FMEA’s, FAI’s etc.
Resolution of technical problems that may arise during the manufacturing process.
Route card changes as a result or rework activities.
Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions.
Support to the Non Conformance Process using SAP.
Skills / Experience:
Verification & validation
Design modifications
COMMISSIONING
FMEA’s
Configuration control
Sub-assembly manufacturing
Industrial Validation through the use of FMEA’s, translating design requirements, interpret Design Drawings with a view to producing Manufacturing Build Instructions. Management of Configuration control by the embodiment of Design Modifications,
Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 and level 3 (ONC) OR Formal further education certificate to HNC or equivalent certificate with experience within an engineering discipline
5 years’ experience within an engineering discipline.
Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators.
Have experience of Electronic Sub Assembly manufacture through to System level builds.
Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems.
Must be able to work within and contribute to a team environment.
Recognise and understand customer requirements, and respond to them
Reference: 224918023
https://jobs.careeraddict.com/post/113283594
Manufacturing Engineer
Posted on May 25, 2026 by CV-Library
Greater Manchester, United Kingdom
Engineering
Immediate Start
£35 - £35 Hourly
Contract/Project
World Class Defence Organisation based in Bolton is currently looking to recruit 4x Manufacturing Engineers.
Rate: £35.00 per hour
Location: Bolton
Contract: 37 Hours per week
Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’
Duration: 12 Months (initially and then ongoing and long-term thereafter)
IR35 status: Inside IR35 (Umbrella)
Manufacturing Engineer Job Description:
As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing.
Compilation and update of Manufacturing Instructions.
Design, Commissioning and proving of associated tooling.
Support the industrial validation process through the use of FMEA’s, FAI’s etc.
Resolution of technical problems that may arise during the manufacturing process.
Route card changes as a result or rework activities.
Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions.
Support to the Non Conformance Process using SAP.
Skills / Experience:
Verification & validation
Design modifications
COMMISSIONING
FMEA’s
Configuration control
Sub-assembly manufacturing
Industrial Validation through the use of FMEA’s, translating design requirements, interpret Design Drawings with a view to producing Manufacturing Build Instructions. Management of Configuration control by the embodiment of Design Modifications,
Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 and level 3 (ONC) OR Formal further education certificate to HNC or equivalent certificate with experience within an engineering discipline
5 years’ experience within an engineering discipline.
Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators.
Have experience of Electronic Sub Assembly manufacture through to System level builds.
Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems.
Must be able to work within and contribute to a team environment.
Recognise and understand customer requirements, and respond to them
Rate: £35.00 per hour
Location: Bolton
Contract: 37 Hours per week
Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’
Duration: 12 Months (initially and then ongoing and long-term thereafter)
IR35 status: Inside IR35 (Umbrella)
Manufacturing Engineer Job Description:
As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing.
Compilation and update of Manufacturing Instructions.
Design, Commissioning and proving of associated tooling.
Support the industrial validation process through the use of FMEA’s, FAI’s etc.
Resolution of technical problems that may arise during the manufacturing process.
Route card changes as a result or rework activities.
Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions.
Support to the Non Conformance Process using SAP.
Skills / Experience:
Verification & validation
Design modifications
COMMISSIONING
FMEA’s
Configuration control
Sub-assembly manufacturing
Industrial Validation through the use of FMEA’s, translating design requirements, interpret Design Drawings with a view to producing Manufacturing Build Instructions. Management of Configuration control by the embodiment of Design Modifications,
Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 and level 3 (ONC) OR Formal further education certificate to HNC or equivalent certificate with experience within an engineering discipline
5 years’ experience within an engineering discipline.
Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators.
Have experience of Electronic Sub Assembly manufacture through to System level builds.
Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems.
Must be able to work within and contribute to a team environment.
Recognise and understand customer requirements, and respond to them
Reference: 224918023
Share this job:
Alert me to jobs like this:
Amplify your job search:
Expert career advice
Increase interview chances with our downloads and specialist services.
Visit Blog