Maintenance Technician II
Posted on Oct 9, 2024 by Silfab Solar
Burlington, WA
Engineering
Immediate Start
Annual Salary
Full-Time
Job Description
Summary of Position
A Maintenance Technician II is responsible for performing facility and process equipment preventative maintenance, attending to equipment downtime as required, and completing various projects related to maintenance and engineering requests. This position requires 4-5 years of maintenance experience in a manufacturing environment or 2 years of maintenance experience with a recognized trade certification.
Essential Duties and Responsibilities
Maintain compliance with all Company policies.
Maintain personal compliance with the Occupational Health and Safety Act and recommend measures to improve health and safety within the facility.
Demonstrate safe work practices and follow company safety policies, procedures, and regulations including but not limited to Lock Out/Tag Out practices.
Provide recommendations to improve preventative/predictive maintenance tasks to optimize equipment availability.
Be an effective team player and work well with all other departments.
Adhere to work orders and utilize CMMS system for data entry.
Perform unplanned and planned (preventative and predictive) maintenance on production and facility equipment as required, utilizing a Computerized Maintenance Management System (CMMS) to record work completed.
Complete small electrical and/or mechanical projects as directed by Team Lead or Supervisor.
Diagnose basic to medium complex electrical systems mechanical components, pneumatic components, and controls to identify hazards, defects, and need for adjustments, repairs, or programming.
Maintain and perform repairs on equipment to restore them to proper, safe, and optimal working conditions.
Support installation, set up, modification, and relocation of equipment to accommodate or improve production requirements.
Read electrical and electronic schematics/diagrams, and basic hydraulic and pneumatic diagrams.
Test low voltage electrical and electronic equipment and components for continuity, current, voltage, and resistance.
Maintain an organized workplace that complies with housekeeping requirements.
If certified, wire new control panels according to supplied drawing and verbal instructions while adhering to Hydro Codes and other applicable standards and regulations.
If certified, make trade calculations for load requirements and select appropriate sizes/grades of components in accordance with current electrical code.
If certified, run new power supply lines to new/relocated equipment according to IEE wiring regulations, Electrical Safety Code, and company policy.
Ability to work rotating shifts, overnights, weekends, holidays, and overtime, as needed.
Must be able to lift upwards of 50lbs.
Summary of Position
A Maintenance Technician II is responsible for performing facility and process equipment preventative maintenance, attending to equipment downtime as required, and completing various projects related to maintenance and engineering requests. This position requires 4-5 years of maintenance experience in a manufacturing environment or 2 years of maintenance experience with a recognized trade certification.
Essential Duties and Responsibilities
Maintain compliance with all Company policies.
Maintain personal compliance with the Occupational Health and Safety Act and recommend measures to improve health and safety within the facility.
Demonstrate safe work practices and follow company safety policies, procedures, and regulations including but not limited to Lock Out/Tag Out practices.
Provide recommendations to improve preventative/predictive maintenance tasks to optimize equipment availability.
Be an effective team player and work well with all other departments.
Adhere to work orders and utilize CMMS system for data entry.
Perform unplanned and planned (preventative and predictive) maintenance on production and facility equipment as required, utilizing a Computerized Maintenance Management System (CMMS) to record work completed.
Complete small electrical and/or mechanical projects as directed by Team Lead or Supervisor.
Diagnose basic to medium complex electrical systems mechanical components, pneumatic components, and controls to identify hazards, defects, and need for adjustments, repairs, or programming.
Maintain and perform repairs on equipment to restore them to proper, safe, and optimal working conditions.
Support installation, set up, modification, and relocation of equipment to accommodate or improve production requirements.
Read electrical and electronic schematics/diagrams, and basic hydraulic and pneumatic diagrams.
Test low voltage electrical and electronic equipment and components for continuity, current, voltage, and resistance.
Maintain an organized workplace that complies with housekeeping requirements.
If certified, wire new control panels according to supplied drawing and verbal instructions while adhering to Hydro Codes and other applicable standards and regulations.
If certified, make trade calculations for load requirements and select appropriate sizes/grades of components in accordance with current electrical code.
If certified, run new power supply lines to new/relocated equipment according to IEE wiring regulations, Electrical Safety Code, and company policy.
Ability to work rotating shifts, overnights, weekends, holidays, and overtime, as needed.
Must be able to lift upwards of 50lbs.
Reference: 203846160
https://jobs.careeraddict.com/post/96044903
Maintenance Technician II
Posted on Oct 9, 2024 by Silfab Solar
Burlington, WA
Engineering
Immediate Start
Annual Salary
Full-Time
Job Description
Summary of Position
A Maintenance Technician II is responsible for performing facility and process equipment preventative maintenance, attending to equipment downtime as required, and completing various projects related to maintenance and engineering requests. This position requires 4-5 years of maintenance experience in a manufacturing environment or 2 years of maintenance experience with a recognized trade certification.
Essential Duties and Responsibilities
Maintain compliance with all Company policies.
Maintain personal compliance with the Occupational Health and Safety Act and recommend measures to improve health and safety within the facility.
Demonstrate safe work practices and follow company safety policies, procedures, and regulations including but not limited to Lock Out/Tag Out practices.
Provide recommendations to improve preventative/predictive maintenance tasks to optimize equipment availability.
Be an effective team player and work well with all other departments.
Adhere to work orders and utilize CMMS system for data entry.
Perform unplanned and planned (preventative and predictive) maintenance on production and facility equipment as required, utilizing a Computerized Maintenance Management System (CMMS) to record work completed.
Complete small electrical and/or mechanical projects as directed by Team Lead or Supervisor.
Diagnose basic to medium complex electrical systems mechanical components, pneumatic components, and controls to identify hazards, defects, and need for adjustments, repairs, or programming.
Maintain and perform repairs on equipment to restore them to proper, safe, and optimal working conditions.
Support installation, set up, modification, and relocation of equipment to accommodate or improve production requirements.
Read electrical and electronic schematics/diagrams, and basic hydraulic and pneumatic diagrams.
Test low voltage electrical and electronic equipment and components for continuity, current, voltage, and resistance.
Maintain an organized workplace that complies with housekeeping requirements.
If certified, wire new control panels according to supplied drawing and verbal instructions while adhering to Hydro Codes and other applicable standards and regulations.
If certified, make trade calculations for load requirements and select appropriate sizes/grades of components in accordance with current electrical code.
If certified, run new power supply lines to new/relocated equipment according to IEE wiring regulations, Electrical Safety Code, and company policy.
Ability to work rotating shifts, overnights, weekends, holidays, and overtime, as needed.
Must be able to lift upwards of 50lbs.
Summary of Position
A Maintenance Technician II is responsible for performing facility and process equipment preventative maintenance, attending to equipment downtime as required, and completing various projects related to maintenance and engineering requests. This position requires 4-5 years of maintenance experience in a manufacturing environment or 2 years of maintenance experience with a recognized trade certification.
Essential Duties and Responsibilities
Maintain compliance with all Company policies.
Maintain personal compliance with the Occupational Health and Safety Act and recommend measures to improve health and safety within the facility.
Demonstrate safe work practices and follow company safety policies, procedures, and regulations including but not limited to Lock Out/Tag Out practices.
Provide recommendations to improve preventative/predictive maintenance tasks to optimize equipment availability.
Be an effective team player and work well with all other departments.
Adhere to work orders and utilize CMMS system for data entry.
Perform unplanned and planned (preventative and predictive) maintenance on production and facility equipment as required, utilizing a Computerized Maintenance Management System (CMMS) to record work completed.
Complete small electrical and/or mechanical projects as directed by Team Lead or Supervisor.
Diagnose basic to medium complex electrical systems mechanical components, pneumatic components, and controls to identify hazards, defects, and need for adjustments, repairs, or programming.
Maintain and perform repairs on equipment to restore them to proper, safe, and optimal working conditions.
Support installation, set up, modification, and relocation of equipment to accommodate or improve production requirements.
Read electrical and electronic schematics/diagrams, and basic hydraulic and pneumatic diagrams.
Test low voltage electrical and electronic equipment and components for continuity, current, voltage, and resistance.
Maintain an organized workplace that complies with housekeeping requirements.
If certified, wire new control panels according to supplied drawing and verbal instructions while adhering to Hydro Codes and other applicable standards and regulations.
If certified, make trade calculations for load requirements and select appropriate sizes/grades of components in accordance with current electrical code.
If certified, run new power supply lines to new/relocated equipment according to IEE wiring regulations, Electrical Safety Code, and company policy.
Ability to work rotating shifts, overnights, weekends, holidays, and overtime, as needed.
Must be able to lift upwards of 50lbs.
Reference: 203846160
Share this job:
Alert me to jobs like this:
Amplify your job search:
Expert career advice
Increase interview chances with our downloads and specialist services.
Visit Blog