Material Handling Technician
Posted on Oct 8, 2024 by NFI Industries
Commerce City, CO
Transport
Immediate Start
Annual Salary
Full-Time
Overview:
Under the direct supervision of the Shop Supervisor or Lead Technician the Material Handling Technician is responsible for performing periodic maintenance, repair, replacement and troubleshooting on various models of material handling equipment. Must be proficient with data input or paper work that is required to perform all job requirements. Maintain service and support material handling equipment at the internal customer location in a timely and cost-effective manner so that customer requirements are met.
Responsibilities:
Repair, or replace major system components, including circuit boards and other electrical parts, hydraulic, mechanical, L.P. systems, power steering and transmissions, engines with limited supervision.
Troubleshoot and diagnose most material handling equipment components.
Perform engine tune-ups on most makes of equipment without supervision.
Perform proper PM’s in a timely manner.
Be able to troubleshoot and diagnose most complex electrical systems on IC and electric trucks.
Perform and maintain proper battery maintenance on electric equipment.
Be able to use and maintain all specialty trade tools properly.
Operate service van in a clean, safe and secure manner following all required safety rules for the job.
Follows all safety procedures in performing work as well as company policies and any other safety procedures necessary to complete work assignments safely.
Demonstrates exceptional customer service skills.
Properly identify and order all necessary replacement parts.
Driving is an essential function of this position and a valid current driver’s license must be maintained at all times.
Work with all departments and employees to insure quality of customer service.
Report all accidents, injuries, safety violations and unsafe working conditions immediately.
Account for all parts, materials, tools and consumables used as required.
Schedule/ Shift: Monday- Friday, 7:00 am- 3:30 pm
Qualifications:
High school diploma, G.E.D. or tech school graduate preferred
Minimum two years of experience in repair and maintenance on material handling equipment.
Read and understand electrical and hydraulic system schematics
Ability to lift up to 50 pounds with our without reasonable assistance
Must be capable of becoming certified to operate equipment.
Must be willing and able to frequently push, pull, kneel, bend and reach.
Keep an adequate set of personal tools as required.
Valid Driver License
Customer Service Skills and abilities.
Basic Computer knowledge including Microsoft Office (Word, Excel)
We are excited to share the base hourly rate for this position is $25.00- $30.00/HOUR. NFI takes into consideration applicants' qualifications, experience, education, geographic location, when determining a starting rate of pay.
Employees are also eligible for a robust benefit program , which includes Medical, Dental, Vision, Prescription Drug Coverage, 401k Plan, Wellness Program, Life Insurance, Paid Time Off, and Paid Parental Leave, among other benefit plan options.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)
LA County Applicants: The Company will consider qualified applicants, including those with criminal histories, in a manner consistent with applicable state and local laws.
Under the direct supervision of the Shop Supervisor or Lead Technician the Material Handling Technician is responsible for performing periodic maintenance, repair, replacement and troubleshooting on various models of material handling equipment. Must be proficient with data input or paper work that is required to perform all job requirements. Maintain service and support material handling equipment at the internal customer location in a timely and cost-effective manner so that customer requirements are met.
Responsibilities:
Repair, or replace major system components, including circuit boards and other electrical parts, hydraulic, mechanical, L.P. systems, power steering and transmissions, engines with limited supervision.
Troubleshoot and diagnose most material handling equipment components.
Perform engine tune-ups on most makes of equipment without supervision.
Perform proper PM’s in a timely manner.
Be able to troubleshoot and diagnose most complex electrical systems on IC and electric trucks.
Perform and maintain proper battery maintenance on electric equipment.
Be able to use and maintain all specialty trade tools properly.
Operate service van in a clean, safe and secure manner following all required safety rules for the job.
Follows all safety procedures in performing work as well as company policies and any other safety procedures necessary to complete work assignments safely.
Demonstrates exceptional customer service skills.
Properly identify and order all necessary replacement parts.
Driving is an essential function of this position and a valid current driver’s license must be maintained at all times.
Work with all departments and employees to insure quality of customer service.
Report all accidents, injuries, safety violations and unsafe working conditions immediately.
Account for all parts, materials, tools and consumables used as required.
Schedule/ Shift: Monday- Friday, 7:00 am- 3:30 pm
Qualifications:
High school diploma, G.E.D. or tech school graduate preferred
Minimum two years of experience in repair and maintenance on material handling equipment.
Read and understand electrical and hydraulic system schematics
Ability to lift up to 50 pounds with our without reasonable assistance
Must be capable of becoming certified to operate equipment.
Must be willing and able to frequently push, pull, kneel, bend and reach.
Keep an adequate set of personal tools as required.
Valid Driver License
Customer Service Skills and abilities.
Basic Computer knowledge including Microsoft Office (Word, Excel)
We are excited to share the base hourly rate for this position is $25.00- $30.00/HOUR. NFI takes into consideration applicants' qualifications, experience, education, geographic location, when determining a starting rate of pay.
Employees are also eligible for a robust benefit program , which includes Medical, Dental, Vision, Prescription Drug Coverage, 401k Plan, Wellness Program, Life Insurance, Paid Time Off, and Paid Parental Leave, among other benefit plan options.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)
LA County Applicants: The Company will consider qualified applicants, including those with criminal histories, in a manner consistent with applicable state and local laws.
Reference: 203701756
https://jobs.careeraddict.com/post/96036119
Material Handling Technician
Posted on Oct 8, 2024 by NFI Industries
Commerce City, CO
Transport
Immediate Start
Annual Salary
Full-Time
Overview:
Under the direct supervision of the Shop Supervisor or Lead Technician the Material Handling Technician is responsible for performing periodic maintenance, repair, replacement and troubleshooting on various models of material handling equipment. Must be proficient with data input or paper work that is required to perform all job requirements. Maintain service and support material handling equipment at the internal customer location in a timely and cost-effective manner so that customer requirements are met.
Responsibilities:
Repair, or replace major system components, including circuit boards and other electrical parts, hydraulic, mechanical, L.P. systems, power steering and transmissions, engines with limited supervision.
Troubleshoot and diagnose most material handling equipment components.
Perform engine tune-ups on most makes of equipment without supervision.
Perform proper PM’s in a timely manner.
Be able to troubleshoot and diagnose most complex electrical systems on IC and electric trucks.
Perform and maintain proper battery maintenance on electric equipment.
Be able to use and maintain all specialty trade tools properly.
Operate service van in a clean, safe and secure manner following all required safety rules for the job.
Follows all safety procedures in performing work as well as company policies and any other safety procedures necessary to complete work assignments safely.
Demonstrates exceptional customer service skills.
Properly identify and order all necessary replacement parts.
Driving is an essential function of this position and a valid current driver’s license must be maintained at all times.
Work with all departments and employees to insure quality of customer service.
Report all accidents, injuries, safety violations and unsafe working conditions immediately.
Account for all parts, materials, tools and consumables used as required.
Schedule/ Shift: Monday- Friday, 7:00 am- 3:30 pm
Qualifications:
High school diploma, G.E.D. or tech school graduate preferred
Minimum two years of experience in repair and maintenance on material handling equipment.
Read and understand electrical and hydraulic system schematics
Ability to lift up to 50 pounds with our without reasonable assistance
Must be capable of becoming certified to operate equipment.
Must be willing and able to frequently push, pull, kneel, bend and reach.
Keep an adequate set of personal tools as required.
Valid Driver License
Customer Service Skills and abilities.
Basic Computer knowledge including Microsoft Office (Word, Excel)
We are excited to share the base hourly rate for this position is $25.00- $30.00/HOUR. NFI takes into consideration applicants' qualifications, experience, education, geographic location, when determining a starting rate of pay.
Employees are also eligible for a robust benefit program , which includes Medical, Dental, Vision, Prescription Drug Coverage, 401k Plan, Wellness Program, Life Insurance, Paid Time Off, and Paid Parental Leave, among other benefit plan options.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)
LA County Applicants: The Company will consider qualified applicants, including those with criminal histories, in a manner consistent with applicable state and local laws.
Under the direct supervision of the Shop Supervisor or Lead Technician the Material Handling Technician is responsible for performing periodic maintenance, repair, replacement and troubleshooting on various models of material handling equipment. Must be proficient with data input or paper work that is required to perform all job requirements. Maintain service and support material handling equipment at the internal customer location in a timely and cost-effective manner so that customer requirements are met.
Responsibilities:
Repair, or replace major system components, including circuit boards and other electrical parts, hydraulic, mechanical, L.P. systems, power steering and transmissions, engines with limited supervision.
Troubleshoot and diagnose most material handling equipment components.
Perform engine tune-ups on most makes of equipment without supervision.
Perform proper PM’s in a timely manner.
Be able to troubleshoot and diagnose most complex electrical systems on IC and electric trucks.
Perform and maintain proper battery maintenance on electric equipment.
Be able to use and maintain all specialty trade tools properly.
Operate service van in a clean, safe and secure manner following all required safety rules for the job.
Follows all safety procedures in performing work as well as company policies and any other safety procedures necessary to complete work assignments safely.
Demonstrates exceptional customer service skills.
Properly identify and order all necessary replacement parts.
Driving is an essential function of this position and a valid current driver’s license must be maintained at all times.
Work with all departments and employees to insure quality of customer service.
Report all accidents, injuries, safety violations and unsafe working conditions immediately.
Account for all parts, materials, tools and consumables used as required.
Schedule/ Shift: Monday- Friday, 7:00 am- 3:30 pm
Qualifications:
High school diploma, G.E.D. or tech school graduate preferred
Minimum two years of experience in repair and maintenance on material handling equipment.
Read and understand electrical and hydraulic system schematics
Ability to lift up to 50 pounds with our without reasonable assistance
Must be capable of becoming certified to operate equipment.
Must be willing and able to frequently push, pull, kneel, bend and reach.
Keep an adequate set of personal tools as required.
Valid Driver License
Customer Service Skills and abilities.
Basic Computer knowledge including Microsoft Office (Word, Excel)
We are excited to share the base hourly rate for this position is $25.00- $30.00/HOUR. NFI takes into consideration applicants' qualifications, experience, education, geographic location, when determining a starting rate of pay.
Employees are also eligible for a robust benefit program , which includes Medical, Dental, Vision, Prescription Drug Coverage, 401k Plan, Wellness Program, Life Insurance, Paid Time Off, and Paid Parental Leave, among other benefit plan options.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)
LA County Applicants: The Company will consider qualified applicants, including those with criminal histories, in a manner consistent with applicable state and local laws.
Reference: 203701756
Share this job:
Alert me to jobs like this:
Amplify your job search:
Expert career advice
Increase interview chances with our downloads and specialist services.
Visit Blog