Civil Engineer -Construction Manager
Posted on Oct 7, 2024 by Teklysium Inc
Dallas, TX
Construction
Immediate Start
Annual Salary
Full-Time
Job Description
This project phase constructs approximately 166,000 gross square feet (GSF) of space for a new 30-bed Long-Term Spinal Cord Injury (LTSCI) unit with associated clinical and administrative support spaces at the VA North Texas Health Care System in Dallas, Texas. Construction of the new LTSCI includes renovation of a portion of the existing Acute Care Spinal Cord Injury Building to join and integrate with the new LTSCI. Construction also includes modification and realignment of the campus loop road, utility upgrades, and associated site improvements.
Relevant Project Experience
The CM-CE shall be able to quickly understand and master the requirements of the local state and federal jurisdictions and the requirements of each geographical site.
Experience in the resolution of unforeseen site and design conditions/problems and propose cost effective technical solutions.
Experience conducting inspections and inventories of such structures to identify and note deficiencies, problems, or the general physical condition of such structures.
Must have 6 years experience practicing civil engineering.
Must have 6 years experience inspecting civil construction.
The CM-CE must possess Communication, Language, and Software Skills with the ability to utilize a variety of software programs to monitor, update, and produce work products by applying knowledge of computer literacy.
The CM-CE shall be able to quickly understand and master the requirements of the local state and federal jurisdictions and the requirements of each in relation to this Project.
Experience reviewing design and construction plans against existing site conditions.
Required Skills and Knowledge
Knowledge of all aspects of commercial hospital mechanical construction including but not limited to underground mechanical installation, medical gas systems, domestic water systems, chilled water systems, and steam systems.
Knowledge of construction engineering, geotechnical engineering, and structural engineering.
Knowledge of road design and construction.
Experience working in both vertical and horizontal conduction scenarios.
Ability to provide cost estimates and take-offs for the civil / structural contract modifications.
Ability to determine compliance of workmanship, materials, equipment and installed work with contract requirements and industry standards.
Working knowledge and understanding of building, safety, and environmental codes.
Working knowledge of environmental, civil, safety, architectural and structural fields.
Knowledge of governmental contracting procedures, principles, guidelines and public law.
Communication, Language, and Software Skills
Ability to utilize a variety of software programs to monitor, update, and produce work products by applying knowledge of computer literacy.
Ability to exercise good interpersonal skills.
Education, Certifications, Affiliation
The CM-CE shall be a licensed professional with a degree in Site/Civil Engineering from an accredited institution of higher learning. The individual shall have a minimum of six (6) years of experience in both design and construction.
Additional consideration will be given to a Construction Manager-Civil Engineer who possesses a current professional engineering license registration and maintenance of same throughout tenure.
This project phase constructs approximately 166,000 gross square feet (GSF) of space for a new 30-bed Long-Term Spinal Cord Injury (LTSCI) unit with associated clinical and administrative support spaces at the VA North Texas Health Care System in Dallas, Texas. Construction of the new LTSCI includes renovation of a portion of the existing Acute Care Spinal Cord Injury Building to join and integrate with the new LTSCI. Construction also includes modification and realignment of the campus loop road, utility upgrades, and associated site improvements.
Relevant Project Experience
The CM-CE shall be able to quickly understand and master the requirements of the local state and federal jurisdictions and the requirements of each geographical site.
Experience in the resolution of unforeseen site and design conditions/problems and propose cost effective technical solutions.
Experience conducting inspections and inventories of such structures to identify and note deficiencies, problems, or the general physical condition of such structures.
Must have 6 years experience practicing civil engineering.
Must have 6 years experience inspecting civil construction.
The CM-CE must possess Communication, Language, and Software Skills with the ability to utilize a variety of software programs to monitor, update, and produce work products by applying knowledge of computer literacy.
The CM-CE shall be able to quickly understand and master the requirements of the local state and federal jurisdictions and the requirements of each in relation to this Project.
Experience reviewing design and construction plans against existing site conditions.
Required Skills and Knowledge
Knowledge of all aspects of commercial hospital mechanical construction including but not limited to underground mechanical installation, medical gas systems, domestic water systems, chilled water systems, and steam systems.
Knowledge of construction engineering, geotechnical engineering, and structural engineering.
Knowledge of road design and construction.
Experience working in both vertical and horizontal conduction scenarios.
Ability to provide cost estimates and take-offs for the civil / structural contract modifications.
Ability to determine compliance of workmanship, materials, equipment and installed work with contract requirements and industry standards.
Working knowledge and understanding of building, safety, and environmental codes.
Working knowledge of environmental, civil, safety, architectural and structural fields.
Knowledge of governmental contracting procedures, principles, guidelines and public law.
Communication, Language, and Software Skills
Ability to utilize a variety of software programs to monitor, update, and produce work products by applying knowledge of computer literacy.
Ability to exercise good interpersonal skills.
Education, Certifications, Affiliation
The CM-CE shall be a licensed professional with a degree in Site/Civil Engineering from an accredited institution of higher learning. The individual shall have a minimum of six (6) years of experience in both design and construction.
Additional consideration will be given to a Construction Manager-Civil Engineer who possesses a current professional engineering license registration and maintenance of same throughout tenure.
Reference: 199173790
https://jobs.careeraddict.com/post/95998510
Civil Engineer -Construction Manager
Posted on Oct 7, 2024 by Teklysium Inc
Dallas, TX
Construction
Immediate Start
Annual Salary
Full-Time
Job Description
This project phase constructs approximately 166,000 gross square feet (GSF) of space for a new 30-bed Long-Term Spinal Cord Injury (LTSCI) unit with associated clinical and administrative support spaces at the VA North Texas Health Care System in Dallas, Texas. Construction of the new LTSCI includes renovation of a portion of the existing Acute Care Spinal Cord Injury Building to join and integrate with the new LTSCI. Construction also includes modification and realignment of the campus loop road, utility upgrades, and associated site improvements.
Relevant Project Experience
The CM-CE shall be able to quickly understand and master the requirements of the local state and federal jurisdictions and the requirements of each geographical site.
Experience in the resolution of unforeseen site and design conditions/problems and propose cost effective technical solutions.
Experience conducting inspections and inventories of such structures to identify and note deficiencies, problems, or the general physical condition of such structures.
Must have 6 years experience practicing civil engineering.
Must have 6 years experience inspecting civil construction.
The CM-CE must possess Communication, Language, and Software Skills with the ability to utilize a variety of software programs to monitor, update, and produce work products by applying knowledge of computer literacy.
The CM-CE shall be able to quickly understand and master the requirements of the local state and federal jurisdictions and the requirements of each in relation to this Project.
Experience reviewing design and construction plans against existing site conditions.
Required Skills and Knowledge
Knowledge of all aspects of commercial hospital mechanical construction including but not limited to underground mechanical installation, medical gas systems, domestic water systems, chilled water systems, and steam systems.
Knowledge of construction engineering, geotechnical engineering, and structural engineering.
Knowledge of road design and construction.
Experience working in both vertical and horizontal conduction scenarios.
Ability to provide cost estimates and take-offs for the civil / structural contract modifications.
Ability to determine compliance of workmanship, materials, equipment and installed work with contract requirements and industry standards.
Working knowledge and understanding of building, safety, and environmental codes.
Working knowledge of environmental, civil, safety, architectural and structural fields.
Knowledge of governmental contracting procedures, principles, guidelines and public law.
Communication, Language, and Software Skills
Ability to utilize a variety of software programs to monitor, update, and produce work products by applying knowledge of computer literacy.
Ability to exercise good interpersonal skills.
Education, Certifications, Affiliation
The CM-CE shall be a licensed professional with a degree in Site/Civil Engineering from an accredited institution of higher learning. The individual shall have a minimum of six (6) years of experience in both design and construction.
Additional consideration will be given to a Construction Manager-Civil Engineer who possesses a current professional engineering license registration and maintenance of same throughout tenure.
This project phase constructs approximately 166,000 gross square feet (GSF) of space for a new 30-bed Long-Term Spinal Cord Injury (LTSCI) unit with associated clinical and administrative support spaces at the VA North Texas Health Care System in Dallas, Texas. Construction of the new LTSCI includes renovation of a portion of the existing Acute Care Spinal Cord Injury Building to join and integrate with the new LTSCI. Construction also includes modification and realignment of the campus loop road, utility upgrades, and associated site improvements.
Relevant Project Experience
The CM-CE shall be able to quickly understand and master the requirements of the local state and federal jurisdictions and the requirements of each geographical site.
Experience in the resolution of unforeseen site and design conditions/problems and propose cost effective technical solutions.
Experience conducting inspections and inventories of such structures to identify and note deficiencies, problems, or the general physical condition of such structures.
Must have 6 years experience practicing civil engineering.
Must have 6 years experience inspecting civil construction.
The CM-CE must possess Communication, Language, and Software Skills with the ability to utilize a variety of software programs to monitor, update, and produce work products by applying knowledge of computer literacy.
The CM-CE shall be able to quickly understand and master the requirements of the local state and federal jurisdictions and the requirements of each in relation to this Project.
Experience reviewing design and construction plans against existing site conditions.
Required Skills and Knowledge
Knowledge of all aspects of commercial hospital mechanical construction including but not limited to underground mechanical installation, medical gas systems, domestic water systems, chilled water systems, and steam systems.
Knowledge of construction engineering, geotechnical engineering, and structural engineering.
Knowledge of road design and construction.
Experience working in both vertical and horizontal conduction scenarios.
Ability to provide cost estimates and take-offs for the civil / structural contract modifications.
Ability to determine compliance of workmanship, materials, equipment and installed work with contract requirements and industry standards.
Working knowledge and understanding of building, safety, and environmental codes.
Working knowledge of environmental, civil, safety, architectural and structural fields.
Knowledge of governmental contracting procedures, principles, guidelines and public law.
Communication, Language, and Software Skills
Ability to utilize a variety of software programs to monitor, update, and produce work products by applying knowledge of computer literacy.
Ability to exercise good interpersonal skills.
Education, Certifications, Affiliation
The CM-CE shall be a licensed professional with a degree in Site/Civil Engineering from an accredited institution of higher learning. The individual shall have a minimum of six (6) years of experience in both design and construction.
Additional consideration will be given to a Construction Manager-Civil Engineer who possesses a current professional engineering license registration and maintenance of same throughout tenure.
Reference: 199173790
Share this job:
Alert me to jobs like this:
Amplify your job search:
Expert career advice
Increase interview chances with our downloads and specialist services.
Visit Blog