General Technician Assembly or Process Technician PrePaint
Posted on Oct 7, 2024 by Navistar, Inc.
Tulsa, OK
Manufacturing
Immediate Start
Annual Salary
Full-Time
Position Overview:
This requisition is for Contractor Conversion purposes.
Responsibilities:
General Technician:
Prepare weld area appropriately to result in good weld penetration and meets structural integrity criteria
Collaborate with peers to accomplish projects or tasks
Develop and maintain relationships with peers and customers
Participate in group discussions and meetings
Perform checks on product and process
Ensure material integrity by routine inspection by following established procedures and quality processes and specifications
Ensure piece and work output meets specifications
Sort and separate defective materials and parts
Assemble/disassemble and fasten/unfasten parts larger than hand using tools; fit, bolt, weld, cut or otherwise connect components and equipment according to specifications
Assemble/disassemble small parts not requiring precision alignment or small tolerances
Assemble/disassemble small parts requiring precision alignment and small tolerances
Performs any other assigned task
Process Technician Pre-Paint:
Prepare paint area appropriately to result in good paint application that meets paint specification criteria
Paint components using appropriate spray techniques
Knowledgeable on how to adjust the spray equipment
Prep the bus to mask the areas that they will paint
Knowledgeable of proper spray techniques
Mix paints and work with solvents
Identify paint defects
Maintain their equipment
Knowledgeable on basic safety precautions when handling paints/solvents
Perform tasks in full gear of painter’s personal protective equipment (PPE)
Perform any other assigned tasks
Minimum Requirements:
None
Additional Requirements:
Qualified candidates, excluding current Navistar employees, must be legally authorized on an unrestricted basis (US Citizen, Legal Permanent Resident, Refugee or Asylee) to be employed in the United States. Navistar does not anticipate providing employment related work sponsorship for this position (e.g., H-1B status)
Ability to read and follow work procedures
Ability to work in areas that are hard to reach and in awkward positions
Ability to stand, crouch, climb 10 hours per day (in addition to overtime) in a non-climate controlled manufacturing environment with intermittent noise, fumes, solvents and paints
Ability to lift up to 35 pounds on a regular basis and work around moving vehicles, on ladders and scaffolding, below ground level, with vibratory tools
This position is safety sensitive and may involve the operation of vehicles, operation of equipment, and/or involve work with power tools, or handling of hazardous materials, that could result in injury or damage to person/property/manufacturing process
Desired Skills:
General Technician:
Experience using hand tools and power tools including, but not limited to: wrenches, clamps, benders, box knives, power drills, and fastening tools
Ability to achieve high performance goals with changing work directions
Experience with body repair
Process Technician Pre-Paint:
At least a year of automotive hands on experience
At least 3 months of automotive painting work
Ability to achieve high performance goals with changing work directions
Good mechanical aptitude
Company Overview:
Navistar, Inc. (“Navistar”) is a purpose-driven company, reimagining how to deliver what matters to create more cohesive relationships, build higher-performing teams and find solutions where others don’t.
Based in Lisle, Illinois, Navistar or its subsidiaries and affiliates produce International® brand commercial trucks and engines, IC Bus® brand school and commercial buses, all-makes OnCommand® Connection advanced connectivity services, and Fleetrite®, ReNEWeD® and Diamond Advantage® brand aftermarket parts.
With a history of innovation dating back to 1831, Navistar has more than 14,500 employees worldwide and is part of TRATON SE, a global champion of the truck and transport services industry. Additional information is available at .
Accelerating the Impact of Sustainable Mobility:
Visit us at to discover more about our organization.
Navistar is an Equal Opportunity Employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.
If you are a qualified individual with a disability and require a reasonable accommodation to access the online application system or participate in the interview process due to your disability, please email to request assistance. Kindly specify Job Requisition Number / Job Title and Location in response. Otherwise, your request may not be considered.
#ridewithnavistar
This requisition is for Contractor Conversion purposes.
Responsibilities:
General Technician:
Prepare weld area appropriately to result in good weld penetration and meets structural integrity criteria
Collaborate with peers to accomplish projects or tasks
Develop and maintain relationships with peers and customers
Participate in group discussions and meetings
Perform checks on product and process
Ensure material integrity by routine inspection by following established procedures and quality processes and specifications
Ensure piece and work output meets specifications
Sort and separate defective materials and parts
Assemble/disassemble and fasten/unfasten parts larger than hand using tools; fit, bolt, weld, cut or otherwise connect components and equipment according to specifications
Assemble/disassemble small parts not requiring precision alignment or small tolerances
Assemble/disassemble small parts requiring precision alignment and small tolerances
Performs any other assigned task
Process Technician Pre-Paint:
Prepare paint area appropriately to result in good paint application that meets paint specification criteria
Paint components using appropriate spray techniques
Knowledgeable on how to adjust the spray equipment
Prep the bus to mask the areas that they will paint
Knowledgeable of proper spray techniques
Mix paints and work with solvents
Identify paint defects
Maintain their equipment
Knowledgeable on basic safety precautions when handling paints/solvents
Perform tasks in full gear of painter’s personal protective equipment (PPE)
Perform any other assigned tasks
Minimum Requirements:
None
Additional Requirements:
Qualified candidates, excluding current Navistar employees, must be legally authorized on an unrestricted basis (US Citizen, Legal Permanent Resident, Refugee or Asylee) to be employed in the United States. Navistar does not anticipate providing employment related work sponsorship for this position (e.g., H-1B status)
Ability to read and follow work procedures
Ability to work in areas that are hard to reach and in awkward positions
Ability to stand, crouch, climb 10 hours per day (in addition to overtime) in a non-climate controlled manufacturing environment with intermittent noise, fumes, solvents and paints
Ability to lift up to 35 pounds on a regular basis and work around moving vehicles, on ladders and scaffolding, below ground level, with vibratory tools
This position is safety sensitive and may involve the operation of vehicles, operation of equipment, and/or involve work with power tools, or handling of hazardous materials, that could result in injury or damage to person/property/manufacturing process
Desired Skills:
General Technician:
Experience using hand tools and power tools including, but not limited to: wrenches, clamps, benders, box knives, power drills, and fastening tools
Ability to achieve high performance goals with changing work directions
Experience with body repair
Process Technician Pre-Paint:
At least a year of automotive hands on experience
At least 3 months of automotive painting work
Ability to achieve high performance goals with changing work directions
Good mechanical aptitude
Company Overview:
Navistar, Inc. (“Navistar”) is a purpose-driven company, reimagining how to deliver what matters to create more cohesive relationships, build higher-performing teams and find solutions where others don’t.
Based in Lisle, Illinois, Navistar or its subsidiaries and affiliates produce International® brand commercial trucks and engines, IC Bus® brand school and commercial buses, all-makes OnCommand® Connection advanced connectivity services, and Fleetrite®, ReNEWeD® and Diamond Advantage® brand aftermarket parts.
With a history of innovation dating back to 1831, Navistar has more than 14,500 employees worldwide and is part of TRATON SE, a global champion of the truck and transport services industry. Additional information is available at .
Accelerating the Impact of Sustainable Mobility:
Visit us at to discover more about our organization.
Navistar is an Equal Opportunity Employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.
If you are a qualified individual with a disability and require a reasonable accommodation to access the online application system or participate in the interview process due to your disability, please email to request assistance. Kindly specify Job Requisition Number / Job Title and Location in response. Otherwise, your request may not be considered.
#ridewithnavistar
Reference: 200044119
https://jobs.careeraddict.com/post/95913663
General Technician Assembly or Process Technician PrePaint
Posted on Oct 7, 2024 by Navistar, Inc.
Tulsa, OK
Manufacturing
Immediate Start
Annual Salary
Full-Time
Position Overview:
This requisition is for Contractor Conversion purposes.
Responsibilities:
General Technician:
Prepare weld area appropriately to result in good weld penetration and meets structural integrity criteria
Collaborate with peers to accomplish projects or tasks
Develop and maintain relationships with peers and customers
Participate in group discussions and meetings
Perform checks on product and process
Ensure material integrity by routine inspection by following established procedures and quality processes and specifications
Ensure piece and work output meets specifications
Sort and separate defective materials and parts
Assemble/disassemble and fasten/unfasten parts larger than hand using tools; fit, bolt, weld, cut or otherwise connect components and equipment according to specifications
Assemble/disassemble small parts not requiring precision alignment or small tolerances
Assemble/disassemble small parts requiring precision alignment and small tolerances
Performs any other assigned task
Process Technician Pre-Paint:
Prepare paint area appropriately to result in good paint application that meets paint specification criteria
Paint components using appropriate spray techniques
Knowledgeable on how to adjust the spray equipment
Prep the bus to mask the areas that they will paint
Knowledgeable of proper spray techniques
Mix paints and work with solvents
Identify paint defects
Maintain their equipment
Knowledgeable on basic safety precautions when handling paints/solvents
Perform tasks in full gear of painter’s personal protective equipment (PPE)
Perform any other assigned tasks
Minimum Requirements:
None
Additional Requirements:
Qualified candidates, excluding current Navistar employees, must be legally authorized on an unrestricted basis (US Citizen, Legal Permanent Resident, Refugee or Asylee) to be employed in the United States. Navistar does not anticipate providing employment related work sponsorship for this position (e.g., H-1B status)
Ability to read and follow work procedures
Ability to work in areas that are hard to reach and in awkward positions
Ability to stand, crouch, climb 10 hours per day (in addition to overtime) in a non-climate controlled manufacturing environment with intermittent noise, fumes, solvents and paints
Ability to lift up to 35 pounds on a regular basis and work around moving vehicles, on ladders and scaffolding, below ground level, with vibratory tools
This position is safety sensitive and may involve the operation of vehicles, operation of equipment, and/or involve work with power tools, or handling of hazardous materials, that could result in injury or damage to person/property/manufacturing process
Desired Skills:
General Technician:
Experience using hand tools and power tools including, but not limited to: wrenches, clamps, benders, box knives, power drills, and fastening tools
Ability to achieve high performance goals with changing work directions
Experience with body repair
Process Technician Pre-Paint:
At least a year of automotive hands on experience
At least 3 months of automotive painting work
Ability to achieve high performance goals with changing work directions
Good mechanical aptitude
Company Overview:
Navistar, Inc. (“Navistar”) is a purpose-driven company, reimagining how to deliver what matters to create more cohesive relationships, build higher-performing teams and find solutions where others don’t.
Based in Lisle, Illinois, Navistar or its subsidiaries and affiliates produce International® brand commercial trucks and engines, IC Bus® brand school and commercial buses, all-makes OnCommand® Connection advanced connectivity services, and Fleetrite®, ReNEWeD® and Diamond Advantage® brand aftermarket parts.
With a history of innovation dating back to 1831, Navistar has more than 14,500 employees worldwide and is part of TRATON SE, a global champion of the truck and transport services industry. Additional information is available at .
Accelerating the Impact of Sustainable Mobility:
Visit us at to discover more about our organization.
Navistar is an Equal Opportunity Employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.
If you are a qualified individual with a disability and require a reasonable accommodation to access the online application system or participate in the interview process due to your disability, please email to request assistance. Kindly specify Job Requisition Number / Job Title and Location in response. Otherwise, your request may not be considered.
#ridewithnavistar
This requisition is for Contractor Conversion purposes.
Responsibilities:
General Technician:
Prepare weld area appropriately to result in good weld penetration and meets structural integrity criteria
Collaborate with peers to accomplish projects or tasks
Develop and maintain relationships with peers and customers
Participate in group discussions and meetings
Perform checks on product and process
Ensure material integrity by routine inspection by following established procedures and quality processes and specifications
Ensure piece and work output meets specifications
Sort and separate defective materials and parts
Assemble/disassemble and fasten/unfasten parts larger than hand using tools; fit, bolt, weld, cut or otherwise connect components and equipment according to specifications
Assemble/disassemble small parts not requiring precision alignment or small tolerances
Assemble/disassemble small parts requiring precision alignment and small tolerances
Performs any other assigned task
Process Technician Pre-Paint:
Prepare paint area appropriately to result in good paint application that meets paint specification criteria
Paint components using appropriate spray techniques
Knowledgeable on how to adjust the spray equipment
Prep the bus to mask the areas that they will paint
Knowledgeable of proper spray techniques
Mix paints and work with solvents
Identify paint defects
Maintain their equipment
Knowledgeable on basic safety precautions when handling paints/solvents
Perform tasks in full gear of painter’s personal protective equipment (PPE)
Perform any other assigned tasks
Minimum Requirements:
None
Additional Requirements:
Qualified candidates, excluding current Navistar employees, must be legally authorized on an unrestricted basis (US Citizen, Legal Permanent Resident, Refugee or Asylee) to be employed in the United States. Navistar does not anticipate providing employment related work sponsorship for this position (e.g., H-1B status)
Ability to read and follow work procedures
Ability to work in areas that are hard to reach and in awkward positions
Ability to stand, crouch, climb 10 hours per day (in addition to overtime) in a non-climate controlled manufacturing environment with intermittent noise, fumes, solvents and paints
Ability to lift up to 35 pounds on a regular basis and work around moving vehicles, on ladders and scaffolding, below ground level, with vibratory tools
This position is safety sensitive and may involve the operation of vehicles, operation of equipment, and/or involve work with power tools, or handling of hazardous materials, that could result in injury or damage to person/property/manufacturing process
Desired Skills:
General Technician:
Experience using hand tools and power tools including, but not limited to: wrenches, clamps, benders, box knives, power drills, and fastening tools
Ability to achieve high performance goals with changing work directions
Experience with body repair
Process Technician Pre-Paint:
At least a year of automotive hands on experience
At least 3 months of automotive painting work
Ability to achieve high performance goals with changing work directions
Good mechanical aptitude
Company Overview:
Navistar, Inc. (“Navistar”) is a purpose-driven company, reimagining how to deliver what matters to create more cohesive relationships, build higher-performing teams and find solutions where others don’t.
Based in Lisle, Illinois, Navistar or its subsidiaries and affiliates produce International® brand commercial trucks and engines, IC Bus® brand school and commercial buses, all-makes OnCommand® Connection advanced connectivity services, and Fleetrite®, ReNEWeD® and Diamond Advantage® brand aftermarket parts.
With a history of innovation dating back to 1831, Navistar has more than 14,500 employees worldwide and is part of TRATON SE, a global champion of the truck and transport services industry. Additional information is available at .
Accelerating the Impact of Sustainable Mobility:
Visit us at to discover more about our organization.
Navistar is an Equal Opportunity Employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.
If you are a qualified individual with a disability and require a reasonable accommodation to access the online application system or participate in the interview process due to your disability, please email to request assistance. Kindly specify Job Requisition Number / Job Title and Location in response. Otherwise, your request may not be considered.
#ridewithnavistar
Reference: 200044119
Share this job:
Alert me to jobs like this:
Amplify your job search:
Expert career advice
Increase interview chances with our downloads and specialist services.
Visit Blog