Electrical Engineer Intern / Co-Op - SPRING 2025
Posted on Sep 27, 2024 by Real Alloy
Beachwood, OH
Engineering
Immediate Start
Annual Salary
Full-Time
- Internship
Overview:
REAL ALLOY is the market leader in third-party aluminum recycling and specification alloy production. Headquartered in Cleveland, Ohio, we have 17 plants strategically located across the United States, Mexico, and Canada. We convert aluminum scrap and by-products into reusable aluminum metal for a growing number of applications across various industries. We are ideally positioned to respond to the needs of an increasingly recycling-conscious world. Advanced technologies enable us to process a large variety of scrap and dross and reduce the amount of residual waste from aluminum manufacturing that would otherwise end up as landfill.
Responsibilities:
Are you an Electrical Engineer looking for an Intern program to sharpen your skills?
Do you have the drive to succeed?
This Electrical Engineering SPRING 2025 Co-Op/Internship is based out of our corporate headquarters in Beachwood, OH but will have the opportunity to travel to our plant facilities within a 4-hour distance to see the benefits of their project work in action. We are open to Co-Op and extension with right candidate. Candidate must be willing to work from the Beachwood location.
This role is for Junior and Senior level college students
Development Tasks:
AutoCAD Electrical drafting, design and revision updates
Introduction AutoCAD Electrical and Orientation Real Alloy Standards and Library
Draw from sketch
Update Drawing from Field Markups
Draw Project Task, Initial Design
Apply AutoCAD skills as needed
Training on applying power design concepts for
Safety requirements for Low Voltage, Controls Power
480VAC Motor Start, Soft Starter and AC Drives
120VAC and 24VDC Controls
Emergency Stop and Safety Circuits
Training on applying technology design concepts
Industrial communications and Ethernet
Rockwell PLC Platforms
Hardware ControlLogix/CompactLogix/SLC500/MicroLogix and Remote I/O
Input & Output Interface to equipment
Online Troubleshooting and Support
Rockwell Studio 5000 / RS Logix 500 PLC programming
Programming Organization
Self-Documentation
Ignition SCADA/HMI programming
Projects Tasks:
Assignment of project tasks
Design concept
Hardware development
Co-work with Mechanical Engineering
Programming and Testing
Communication between Engineering and Plant personnel
Project Documentation
Deployment Plan
Implementation at plant
Translation Plan to like in kind equipment
Report out to business
Potential Projects
Combustion Controls Gas and Air Flow Meter HART Integration
480VAC Switchgear Power Equipment Data Integration and Collection into Ignition SCADA
Develop Reverberatory Furnace Electrical Drawing set
Integration of AC Drives into PLCs and SCADA over Ethernet
Qualifications:
Currently pursuing a BS/MS electrical engineering degree - minimum of 3 years' progress towards a bachelor's degree in electrical engineering
Overall GPA of 3.25 or above
Ability to travel to job-sites for 1-3 days if needed
Ability to read an electrical schematic
AutoCad familiarity and/or experience
Familiarity with electrical circuits design and operation
Familiarity with data collection, analysis, and presentation
Knowledge of and/or experience with PLC programming (preferably Allen Bradley)
Knowledge of and/or experience with HMI programming
:
The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not construed to be an exhaustive list of all job duties performed by the personnel so classified.
Equal Opportunity:
REAL ALLOY is an equal opportunity employer and supports diversity in the workplace. Qualified applications will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Our HR teams will reach out to the applicants who met the qualifications and most closely aligned with requirements of the positions.
REAL ALLOY is the market leader in third-party aluminum recycling and specification alloy production. Headquartered in Cleveland, Ohio, we have 17 plants strategically located across the United States, Mexico, and Canada. We convert aluminum scrap and by-products into reusable aluminum metal for a growing number of applications across various industries. We are ideally positioned to respond to the needs of an increasingly recycling-conscious world. Advanced technologies enable us to process a large variety of scrap and dross and reduce the amount of residual waste from aluminum manufacturing that would otherwise end up as landfill.
Responsibilities:
Are you an Electrical Engineer looking for an Intern program to sharpen your skills?
Do you have the drive to succeed?
This Electrical Engineering SPRING 2025 Co-Op/Internship is based out of our corporate headquarters in Beachwood, OH but will have the opportunity to travel to our plant facilities within a 4-hour distance to see the benefits of their project work in action. We are open to Co-Op and extension with right candidate. Candidate must be willing to work from the Beachwood location.
This role is for Junior and Senior level college students
Development Tasks:
AutoCAD Electrical drafting, design and revision updates
Introduction AutoCAD Electrical and Orientation Real Alloy Standards and Library
Draw from sketch
Update Drawing from Field Markups
Draw Project Task, Initial Design
Apply AutoCAD skills as needed
Training on applying power design concepts for
Safety requirements for Low Voltage, Controls Power
480VAC Motor Start, Soft Starter and AC Drives
120VAC and 24VDC Controls
Emergency Stop and Safety Circuits
Training on applying technology design concepts
Industrial communications and Ethernet
Rockwell PLC Platforms
Hardware ControlLogix/CompactLogix/SLC500/MicroLogix and Remote I/O
Input & Output Interface to equipment
Online Troubleshooting and Support
Rockwell Studio 5000 / RS Logix 500 PLC programming
Programming Organization
Self-Documentation
Ignition SCADA/HMI programming
Projects Tasks:
Assignment of project tasks
Design concept
Hardware development
Co-work with Mechanical Engineering
Programming and Testing
Communication between Engineering and Plant personnel
Project Documentation
Deployment Plan
Implementation at plant
Translation Plan to like in kind equipment
Report out to business
Potential Projects
Combustion Controls Gas and Air Flow Meter HART Integration
480VAC Switchgear Power Equipment Data Integration and Collection into Ignition SCADA
Develop Reverberatory Furnace Electrical Drawing set
Integration of AC Drives into PLCs and SCADA over Ethernet
Qualifications:
Currently pursuing a BS/MS electrical engineering degree - minimum of 3 years' progress towards a bachelor's degree in electrical engineering
Overall GPA of 3.25 or above
Ability to travel to job-sites for 1-3 days if needed
Ability to read an electrical schematic
AutoCad familiarity and/or experience
Familiarity with electrical circuits design and operation
Familiarity with data collection, analysis, and presentation
Knowledge of and/or experience with PLC programming (preferably Allen Bradley)
Knowledge of and/or experience with HMI programming
:
The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not construed to be an exhaustive list of all job duties performed by the personnel so classified.
Equal Opportunity:
REAL ALLOY is an equal opportunity employer and supports diversity in the workplace. Qualified applications will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Our HR teams will reach out to the applicants who met the qualifications and most closely aligned with requirements of the positions.
Reference: 202589769
https://jobs.careeraddict.com/post/95629991
Electrical Engineer Intern / Co-Op - SPRING 2025
Posted on Sep 27, 2024 by Real Alloy
Beachwood, OH
Engineering
Immediate Start
Annual Salary
Full-Time
- Internship
Overview:
REAL ALLOY is the market leader in third-party aluminum recycling and specification alloy production. Headquartered in Cleveland, Ohio, we have 17 plants strategically located across the United States, Mexico, and Canada. We convert aluminum scrap and by-products into reusable aluminum metal for a growing number of applications across various industries. We are ideally positioned to respond to the needs of an increasingly recycling-conscious world. Advanced technologies enable us to process a large variety of scrap and dross and reduce the amount of residual waste from aluminum manufacturing that would otherwise end up as landfill.
Responsibilities:
Are you an Electrical Engineer looking for an Intern program to sharpen your skills?
Do you have the drive to succeed?
This Electrical Engineering SPRING 2025 Co-Op/Internship is based out of our corporate headquarters in Beachwood, OH but will have the opportunity to travel to our plant facilities within a 4-hour distance to see the benefits of their project work in action. We are open to Co-Op and extension with right candidate. Candidate must be willing to work from the Beachwood location.
This role is for Junior and Senior level college students
Development Tasks:
AutoCAD Electrical drafting, design and revision updates
Introduction AutoCAD Electrical and Orientation Real Alloy Standards and Library
Draw from sketch
Update Drawing from Field Markups
Draw Project Task, Initial Design
Apply AutoCAD skills as needed
Training on applying power design concepts for
Safety requirements for Low Voltage, Controls Power
480VAC Motor Start, Soft Starter and AC Drives
120VAC and 24VDC Controls
Emergency Stop and Safety Circuits
Training on applying technology design concepts
Industrial communications and Ethernet
Rockwell PLC Platforms
Hardware ControlLogix/CompactLogix/SLC500/MicroLogix and Remote I/O
Input & Output Interface to equipment
Online Troubleshooting and Support
Rockwell Studio 5000 / RS Logix 500 PLC programming
Programming Organization
Self-Documentation
Ignition SCADA/HMI programming
Projects Tasks:
Assignment of project tasks
Design concept
Hardware development
Co-work with Mechanical Engineering
Programming and Testing
Communication between Engineering and Plant personnel
Project Documentation
Deployment Plan
Implementation at plant
Translation Plan to like in kind equipment
Report out to business
Potential Projects
Combustion Controls Gas and Air Flow Meter HART Integration
480VAC Switchgear Power Equipment Data Integration and Collection into Ignition SCADA
Develop Reverberatory Furnace Electrical Drawing set
Integration of AC Drives into PLCs and SCADA over Ethernet
Qualifications:
Currently pursuing a BS/MS electrical engineering degree - minimum of 3 years' progress towards a bachelor's degree in electrical engineering
Overall GPA of 3.25 or above
Ability to travel to job-sites for 1-3 days if needed
Ability to read an electrical schematic
AutoCad familiarity and/or experience
Familiarity with electrical circuits design and operation
Familiarity with data collection, analysis, and presentation
Knowledge of and/or experience with PLC programming (preferably Allen Bradley)
Knowledge of and/or experience with HMI programming
:
The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not construed to be an exhaustive list of all job duties performed by the personnel so classified.
Equal Opportunity:
REAL ALLOY is an equal opportunity employer and supports diversity in the workplace. Qualified applications will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Our HR teams will reach out to the applicants who met the qualifications and most closely aligned with requirements of the positions.
REAL ALLOY is the market leader in third-party aluminum recycling and specification alloy production. Headquartered in Cleveland, Ohio, we have 17 plants strategically located across the United States, Mexico, and Canada. We convert aluminum scrap and by-products into reusable aluminum metal for a growing number of applications across various industries. We are ideally positioned to respond to the needs of an increasingly recycling-conscious world. Advanced technologies enable us to process a large variety of scrap and dross and reduce the amount of residual waste from aluminum manufacturing that would otherwise end up as landfill.
Responsibilities:
Are you an Electrical Engineer looking for an Intern program to sharpen your skills?
Do you have the drive to succeed?
This Electrical Engineering SPRING 2025 Co-Op/Internship is based out of our corporate headquarters in Beachwood, OH but will have the opportunity to travel to our plant facilities within a 4-hour distance to see the benefits of their project work in action. We are open to Co-Op and extension with right candidate. Candidate must be willing to work from the Beachwood location.
This role is for Junior and Senior level college students
Development Tasks:
AutoCAD Electrical drafting, design and revision updates
Introduction AutoCAD Electrical and Orientation Real Alloy Standards and Library
Draw from sketch
Update Drawing from Field Markups
Draw Project Task, Initial Design
Apply AutoCAD skills as needed
Training on applying power design concepts for
Safety requirements for Low Voltage, Controls Power
480VAC Motor Start, Soft Starter and AC Drives
120VAC and 24VDC Controls
Emergency Stop and Safety Circuits
Training on applying technology design concepts
Industrial communications and Ethernet
Rockwell PLC Platforms
Hardware ControlLogix/CompactLogix/SLC500/MicroLogix and Remote I/O
Input & Output Interface to equipment
Online Troubleshooting and Support
Rockwell Studio 5000 / RS Logix 500 PLC programming
Programming Organization
Self-Documentation
Ignition SCADA/HMI programming
Projects Tasks:
Assignment of project tasks
Design concept
Hardware development
Co-work with Mechanical Engineering
Programming and Testing
Communication between Engineering and Plant personnel
Project Documentation
Deployment Plan
Implementation at plant
Translation Plan to like in kind equipment
Report out to business
Potential Projects
Combustion Controls Gas and Air Flow Meter HART Integration
480VAC Switchgear Power Equipment Data Integration and Collection into Ignition SCADA
Develop Reverberatory Furnace Electrical Drawing set
Integration of AC Drives into PLCs and SCADA over Ethernet
Qualifications:
Currently pursuing a BS/MS electrical engineering degree - minimum of 3 years' progress towards a bachelor's degree in electrical engineering
Overall GPA of 3.25 or above
Ability to travel to job-sites for 1-3 days if needed
Ability to read an electrical schematic
AutoCad familiarity and/or experience
Familiarity with electrical circuits design and operation
Familiarity with data collection, analysis, and presentation
Knowledge of and/or experience with PLC programming (preferably Allen Bradley)
Knowledge of and/or experience with HMI programming
:
The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not construed to be an exhaustive list of all job duties performed by the personnel so classified.
Equal Opportunity:
REAL ALLOY is an equal opportunity employer and supports diversity in the workplace. Qualified applications will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Our HR teams will reach out to the applicants who met the qualifications and most closely aligned with requirements of the positions.
Reference: 202589769
Share this job:
Alert me to jobs like this:
Amplify your job search:
Expert career advice
Increase interview chances with our downloads and specialist services.
Visit Blog