Graduate Designer
Posted on Jul 16, 2026 by CV-Library
High Wycombe, Buckinghamshire, United Kingdom
Construction
Immediate Start
£25k - £27k Annual
Full-Time
Graduate Designer Role
Full-time, permanent role
Location: 5 days a week in High Wycombe
Specific Duties
Prepare schematic and working drawings, primarily using CAD.
Visit sites to ascertain site conditions, carry out surveys and attend design meetings as required.
Prepare requests for information, query sheets as required and monitor replies.
Produce drawing schedules, general arrangement and working drawings.
Monitor own progress against contract programme and report progress on a weekly basis.
Attend project handover meetings and compile a design brief for the project.
Produce fabrication information in the form of schedules, cutting lists or component drawings as required to an agreed programme.
Design review - revise and re-issue commented drawings.
Undertake checking responsibilities for fabrication information generated by other design personnel.
Represent OCL as appropriate at any meetings as required.
Select external designers, structural engineers, consultants where relevant and issue letter of
Take on responsibility for a proportion of the design office workload as agreed.
Check all elements to a project including drawing schedules, general arrangement drawings, working drawings and fabrication information.
Be aware of current project workload and project timings.
Provide design and technical support for all other departments as required.
Ensure that the clients are aware of their duties under the Construction (Design & Management)
Identify the significant health and safety hazards likely to be associated with the design and how it may be constructed and maintained. Consider the risks from hazards, which may arise as a result of the design being incorporated into the project and, if possible, alter the design to avoid the risk: or if this is not reasonably practicable to reduce it.
Provide a design risk assessment to enable the planning supervisor and/or the principal contractor to prepare the relevant documentation required of them by the Construction (Design & Management) Regulations.
Where necessary in the interests of health and safety, cooperate with any other designer involved in any other aspect of the project.
If you're interested & have the right experience, then please apply or reach out to Paige Camies at the Fawkes & Reece office
Full-time, permanent role
Location: 5 days a week in High Wycombe
Specific Duties
Prepare schematic and working drawings, primarily using CAD.
Visit sites to ascertain site conditions, carry out surveys and attend design meetings as required.
Prepare requests for information, query sheets as required and monitor replies.
Produce drawing schedules, general arrangement and working drawings.
Monitor own progress against contract programme and report progress on a weekly basis.
Attend project handover meetings and compile a design brief for the project.
Produce fabrication information in the form of schedules, cutting lists or component drawings as required to an agreed programme.
Design review - revise and re-issue commented drawings.
Undertake checking responsibilities for fabrication information generated by other design personnel.
Represent OCL as appropriate at any meetings as required.
Select external designers, structural engineers, consultants where relevant and issue letter of
Take on responsibility for a proportion of the design office workload as agreed.
Check all elements to a project including drawing schedules, general arrangement drawings, working drawings and fabrication information.
Be aware of current project workload and project timings.
Provide design and technical support for all other departments as required.
Ensure that the clients are aware of their duties under the Construction (Design & Management)
Identify the significant health and safety hazards likely to be associated with the design and how it may be constructed and maintained. Consider the risks from hazards, which may arise as a result of the design being incorporated into the project and, if possible, alter the design to avoid the risk: or if this is not reasonably practicable to reduce it.
Provide a design risk assessment to enable the planning supervisor and/or the principal contractor to prepare the relevant documentation required of them by the Construction (Design & Management) Regulations.
Where necessary in the interests of health and safety, cooperate with any other designer involved in any other aspect of the project.
If you're interested & have the right experience, then please apply or reach out to Paige Camies at the Fawkes & Reece office
Reference: 225377811
https://jobs.careeraddict.com/post/113565770
Graduate Designer
Posted on Jul 16, 2026 by CV-Library
High Wycombe, Buckinghamshire, United Kingdom
Construction
Immediate Start
£25k - £27k Annual
Full-Time
Graduate Designer Role
Full-time, permanent role
Location: 5 days a week in High Wycombe
Specific Duties
Prepare schematic and working drawings, primarily using CAD.
Visit sites to ascertain site conditions, carry out surveys and attend design meetings as required.
Prepare requests for information, query sheets as required and monitor replies.
Produce drawing schedules, general arrangement and working drawings.
Monitor own progress against contract programme and report progress on a weekly basis.
Attend project handover meetings and compile a design brief for the project.
Produce fabrication information in the form of schedules, cutting lists or component drawings as required to an agreed programme.
Design review - revise and re-issue commented drawings.
Undertake checking responsibilities for fabrication information generated by other design personnel.
Represent OCL as appropriate at any meetings as required.
Select external designers, structural engineers, consultants where relevant and issue letter of
Take on responsibility for a proportion of the design office workload as agreed.
Check all elements to a project including drawing schedules, general arrangement drawings, working drawings and fabrication information.
Be aware of current project workload and project timings.
Provide design and technical support for all other departments as required.
Ensure that the clients are aware of their duties under the Construction (Design & Management)
Identify the significant health and safety hazards likely to be associated with the design and how it may be constructed and maintained. Consider the risks from hazards, which may arise as a result of the design being incorporated into the project and, if possible, alter the design to avoid the risk: or if this is not reasonably practicable to reduce it.
Provide a design risk assessment to enable the planning supervisor and/or the principal contractor to prepare the relevant documentation required of them by the Construction (Design & Management) Regulations.
Where necessary in the interests of health and safety, cooperate with any other designer involved in any other aspect of the project.
If you're interested & have the right experience, then please apply or reach out to Paige Camies at the Fawkes & Reece office
Full-time, permanent role
Location: 5 days a week in High Wycombe
Specific Duties
Prepare schematic and working drawings, primarily using CAD.
Visit sites to ascertain site conditions, carry out surveys and attend design meetings as required.
Prepare requests for information, query sheets as required and monitor replies.
Produce drawing schedules, general arrangement and working drawings.
Monitor own progress against contract programme and report progress on a weekly basis.
Attend project handover meetings and compile a design brief for the project.
Produce fabrication information in the form of schedules, cutting lists or component drawings as required to an agreed programme.
Design review - revise and re-issue commented drawings.
Undertake checking responsibilities for fabrication information generated by other design personnel.
Represent OCL as appropriate at any meetings as required.
Select external designers, structural engineers, consultants where relevant and issue letter of
Take on responsibility for a proportion of the design office workload as agreed.
Check all elements to a project including drawing schedules, general arrangement drawings, working drawings and fabrication information.
Be aware of current project workload and project timings.
Provide design and technical support for all other departments as required.
Ensure that the clients are aware of their duties under the Construction (Design & Management)
Identify the significant health and safety hazards likely to be associated with the design and how it may be constructed and maintained. Consider the risks from hazards, which may arise as a result of the design being incorporated into the project and, if possible, alter the design to avoid the risk: or if this is not reasonably practicable to reduce it.
Provide a design risk assessment to enable the planning supervisor and/or the principal contractor to prepare the relevant documentation required of them by the Construction (Design & Management) Regulations.
Where necessary in the interests of health and safety, cooperate with any other designer involved in any other aspect of the project.
If you're interested & have the right experience, then please apply or reach out to Paige Camies at the Fawkes & Reece office
Reference: 225377811
Share this job:
Alert me to jobs like this:
Amplify your job search:
Expert career advice
Increase interview chances with our downloads and specialist services.
Visit Blog