Chassis Dyno Test Engineer
Posted on Jul 14, 2026 by CV-Library
Canley, West Midlands (County), United Kingdom
Automotive
Immediate Start
£28.5 - £28.5 Hourly
Contract/Project
Chassis Dyno Test Engineer - (phone number removed) - £28.54/hr umbrella rate (Inside IR35)
Do you have experience in chassis dynamometer or engine test facility operation, including vehicle installation, test execution and post-test processes? Turn hands-on engineering into real impact. As a Chassis Dyno Test Engineer, you will help deliver high-quality propulsion and emissions test work in a fast-moving environment, working alongside engineers, academic partners and third-party customers. Based at onsite facilities at Warwick University.
What You Will Do:
- Operate the Environmental Chassis Emissions Dynamometer end-to-end as a Chassis Dyno Test Engineer, ensuring safe and efficient test execution.
- Carry out vehicle check-in, inspection, preparation and check-out, verifying fuel levels, tyres, pressures, fluids and calibration status.
- Prepare and install vehicles on the dynamometer, including correct positioning, strapping, wheel alignment and roller engagement.
- Confirm instrumentation setup and connections to support data quality, readiness and repeatability for every test cycle as a Chassis Dyno Test Engineer.
- Drive test cycles to required standards and profiles, monitoring test conditions and acting promptly if any deviation occurs.
- Support post-test activities such as safe de-instrumentation, vehicle removal, and restoration of the dyno cell to a clean, safe and operational state.
What You Will Bring:
- Experience in chassis dynamometer or engine test facility operation, including vehicle installation, test execution and post-test processes.
- Practical knowledge of vehicle preparation and instrumentation, such as sensor setup, thermocouples, emissions measurement systems and data acquisition.
- Familiarity with test control and data acquisition tools, including AVL systems (for example PUMA, CAMEO), ETAS INCA or equivalent platforms.
- Understanding of emissions testing procedures, including bag emissions measurement systems and basic data quality checks.
- A strong safety mindset and ability to work to structured procedures, while supporting troubleshooting of test setups and instrumentation faults.
This Chassis Dyno Test Engineer role supports the delivery of rigorous engineering programme outputs and helps maintain dependable facility operation within the wider propulsion and emissions testing industry. You will contribute to dependable standards, safety and quality, while collaborating effectively with customer and academic stakeholders to meet scheduled test requirements.
Location:
Onsite at Warwick University in Warwick, supporting chassis dynamometer activities within the Advanced Propulsion Research Laboratory (APRL).
Interested?:
If you are excited by practical, high-impact testing and you enjoy working in a safety-first engineering environment, apply now to be considered for this Chassis Dyno Test Engineer opportunity.
Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.
In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included
Do you have experience in chassis dynamometer or engine test facility operation, including vehicle installation, test execution and post-test processes? Turn hands-on engineering into real impact. As a Chassis Dyno Test Engineer, you will help deliver high-quality propulsion and emissions test work in a fast-moving environment, working alongside engineers, academic partners and third-party customers. Based at onsite facilities at Warwick University.
What You Will Do:
- Operate the Environmental Chassis Emissions Dynamometer end-to-end as a Chassis Dyno Test Engineer, ensuring safe and efficient test execution.
- Carry out vehicle check-in, inspection, preparation and check-out, verifying fuel levels, tyres, pressures, fluids and calibration status.
- Prepare and install vehicles on the dynamometer, including correct positioning, strapping, wheel alignment and roller engagement.
- Confirm instrumentation setup and connections to support data quality, readiness and repeatability for every test cycle as a Chassis Dyno Test Engineer.
- Drive test cycles to required standards and profiles, monitoring test conditions and acting promptly if any deviation occurs.
- Support post-test activities such as safe de-instrumentation, vehicle removal, and restoration of the dyno cell to a clean, safe and operational state.
What You Will Bring:
- Experience in chassis dynamometer or engine test facility operation, including vehicle installation, test execution and post-test processes.
- Practical knowledge of vehicle preparation and instrumentation, such as sensor setup, thermocouples, emissions measurement systems and data acquisition.
- Familiarity with test control and data acquisition tools, including AVL systems (for example PUMA, CAMEO), ETAS INCA or equivalent platforms.
- Understanding of emissions testing procedures, including bag emissions measurement systems and basic data quality checks.
- A strong safety mindset and ability to work to structured procedures, while supporting troubleshooting of test setups and instrumentation faults.
This Chassis Dyno Test Engineer role supports the delivery of rigorous engineering programme outputs and helps maintain dependable facility operation within the wider propulsion and emissions testing industry. You will contribute to dependable standards, safety and quality, while collaborating effectively with customer and academic stakeholders to meet scheduled test requirements.
Location:
Onsite at Warwick University in Warwick, supporting chassis dynamometer activities within the Advanced Propulsion Research Laboratory (APRL).
Interested?:
If you are excited by practical, high-impact testing and you enjoy working in a safety-first engineering environment, apply now to be considered for this Chassis Dyno Test Engineer opportunity.
Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.
In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included
Reference: 225371320
https://jobs.careeraddict.com/post/113558723
Chassis Dyno Test Engineer
Posted on Jul 14, 2026 by CV-Library
Canley, West Midlands (County), United Kingdom
Automotive
Immediate Start
£28.5 - £28.5 Hourly
Contract/Project
Chassis Dyno Test Engineer - (phone number removed) - £28.54/hr umbrella rate (Inside IR35)
Do you have experience in chassis dynamometer or engine test facility operation, including vehicle installation, test execution and post-test processes? Turn hands-on engineering into real impact. As a Chassis Dyno Test Engineer, you will help deliver high-quality propulsion and emissions test work in a fast-moving environment, working alongside engineers, academic partners and third-party customers. Based at onsite facilities at Warwick University.
What You Will Do:
- Operate the Environmental Chassis Emissions Dynamometer end-to-end as a Chassis Dyno Test Engineer, ensuring safe and efficient test execution.
- Carry out vehicle check-in, inspection, preparation and check-out, verifying fuel levels, tyres, pressures, fluids and calibration status.
- Prepare and install vehicles on the dynamometer, including correct positioning, strapping, wheel alignment and roller engagement.
- Confirm instrumentation setup and connections to support data quality, readiness and repeatability for every test cycle as a Chassis Dyno Test Engineer.
- Drive test cycles to required standards and profiles, monitoring test conditions and acting promptly if any deviation occurs.
- Support post-test activities such as safe de-instrumentation, vehicle removal, and restoration of the dyno cell to a clean, safe and operational state.
What You Will Bring:
- Experience in chassis dynamometer or engine test facility operation, including vehicle installation, test execution and post-test processes.
- Practical knowledge of vehicle preparation and instrumentation, such as sensor setup, thermocouples, emissions measurement systems and data acquisition.
- Familiarity with test control and data acquisition tools, including AVL systems (for example PUMA, CAMEO), ETAS INCA or equivalent platforms.
- Understanding of emissions testing procedures, including bag emissions measurement systems and basic data quality checks.
- A strong safety mindset and ability to work to structured procedures, while supporting troubleshooting of test setups and instrumentation faults.
This Chassis Dyno Test Engineer role supports the delivery of rigorous engineering programme outputs and helps maintain dependable facility operation within the wider propulsion and emissions testing industry. You will contribute to dependable standards, safety and quality, while collaborating effectively with customer and academic stakeholders to meet scheduled test requirements.
Location:
Onsite at Warwick University in Warwick, supporting chassis dynamometer activities within the Advanced Propulsion Research Laboratory (APRL).
Interested?:
If you are excited by practical, high-impact testing and you enjoy working in a safety-first engineering environment, apply now to be considered for this Chassis Dyno Test Engineer opportunity.
Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.
In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included
Do you have experience in chassis dynamometer or engine test facility operation, including vehicle installation, test execution and post-test processes? Turn hands-on engineering into real impact. As a Chassis Dyno Test Engineer, you will help deliver high-quality propulsion and emissions test work in a fast-moving environment, working alongside engineers, academic partners and third-party customers. Based at onsite facilities at Warwick University.
What You Will Do:
- Operate the Environmental Chassis Emissions Dynamometer end-to-end as a Chassis Dyno Test Engineer, ensuring safe and efficient test execution.
- Carry out vehicle check-in, inspection, preparation and check-out, verifying fuel levels, tyres, pressures, fluids and calibration status.
- Prepare and install vehicles on the dynamometer, including correct positioning, strapping, wheel alignment and roller engagement.
- Confirm instrumentation setup and connections to support data quality, readiness and repeatability for every test cycle as a Chassis Dyno Test Engineer.
- Drive test cycles to required standards and profiles, monitoring test conditions and acting promptly if any deviation occurs.
- Support post-test activities such as safe de-instrumentation, vehicle removal, and restoration of the dyno cell to a clean, safe and operational state.
What You Will Bring:
- Experience in chassis dynamometer or engine test facility operation, including vehicle installation, test execution and post-test processes.
- Practical knowledge of vehicle preparation and instrumentation, such as sensor setup, thermocouples, emissions measurement systems and data acquisition.
- Familiarity with test control and data acquisition tools, including AVL systems (for example PUMA, CAMEO), ETAS INCA or equivalent platforms.
- Understanding of emissions testing procedures, including bag emissions measurement systems and basic data quality checks.
- A strong safety mindset and ability to work to structured procedures, while supporting troubleshooting of test setups and instrumentation faults.
This Chassis Dyno Test Engineer role supports the delivery of rigorous engineering programme outputs and helps maintain dependable facility operation within the wider propulsion and emissions testing industry. You will contribute to dependable standards, safety and quality, while collaborating effectively with customer and academic stakeholders to meet scheduled test requirements.
Location:
Onsite at Warwick University in Warwick, supporting chassis dynamometer activities within the Advanced Propulsion Research Laboratory (APRL).
Interested?:
If you are excited by practical, high-impact testing and you enjoy working in a safety-first engineering environment, apply now to be considered for this Chassis Dyno Test Engineer opportunity.
Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.
In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included
Reference: 225371320
Share this job:
Alert me to jobs like this:
Amplify your job search:
Expert career advice
Increase interview chances with our downloads and specialist services.
Visit Blog