Procurement Engineer
Posted on May 28, 2026 by CV-Library
Wallingford, Oxfordshire, United Kingdom
Engineering
Immediate Start
£26 - £50 Hourly
Contract/Project
Job Title: Procurement Engineer
Location: Eynsham, Oxfordshire
Contract Length: 12 Months (FTC)
Hourly Rate: £26.00 – £40.00 per hour
Job Purpose
To serve as a technical-commercial liaison during a critical supplier onboarding phase. This role ensures that MRI magnet components are optimized for cost and manufacturing without sacrificing the high-performance standards required by Siemens Healthineers.
Responsibilities
*
Supplier Onboarding: "Hit the ground running" with a new supplier integration, ensuring they meet technical and cost specifications from day one.
*
Stakeholder Mediation: Act as the "translator" between R&D designers, engineers, and external suppliers to balance Cost, Quality, and Technical Performance.
*
Cost Driver Analysis: Identify exactly where costs sit within manufacturing techniques (machining, fabrication, etc.) and challenge stakeholders to optimize them.
*
Tactical Procurement: Drive the "Design for Manufacture" (DfM) process to ensure newly designed components are commercially viable before purchase.
*
Travel: Execute up to 20% travel (domestic/international) to visit supplier sites and ensure alignment.
About You
*
The Hybrid Profile: You possess a rare blend of Mechanical Engineering knowledge and Commodity Management experience.
*
Qualified: HNC or BEng in a relevant engineering discipline.
*
Technically Fluent: You can hold your own in a room full of R&D designers, but also pivot to negotiate cost drivers with a supplier.
*
Agile: Ready to jump into an active project immediately; you don't need hand-holding to understand manufacturing blueprints or supply chain workflows
Location: Eynsham, Oxfordshire
Contract Length: 12 Months (FTC)
Hourly Rate: £26.00 – £40.00 per hour
Job Purpose
To serve as a technical-commercial liaison during a critical supplier onboarding phase. This role ensures that MRI magnet components are optimized for cost and manufacturing without sacrificing the high-performance standards required by Siemens Healthineers.
Responsibilities
*
Supplier Onboarding: "Hit the ground running" with a new supplier integration, ensuring they meet technical and cost specifications from day one.
*
Stakeholder Mediation: Act as the "translator" between R&D designers, engineers, and external suppliers to balance Cost, Quality, and Technical Performance.
*
Cost Driver Analysis: Identify exactly where costs sit within manufacturing techniques (machining, fabrication, etc.) and challenge stakeholders to optimize them.
*
Tactical Procurement: Drive the "Design for Manufacture" (DfM) process to ensure newly designed components are commercially viable before purchase.
*
Travel: Execute up to 20% travel (domestic/international) to visit supplier sites and ensure alignment.
About You
*
The Hybrid Profile: You possess a rare blend of Mechanical Engineering knowledge and Commodity Management experience.
*
Qualified: HNC or BEng in a relevant engineering discipline.
*
Technically Fluent: You can hold your own in a room full of R&D designers, but also pivot to negotiate cost drivers with a supplier.
*
Agile: Ready to jump into an active project immediately; you don't need hand-holding to understand manufacturing blueprints or supply chain workflows
Reference: 225168821
https://jobs.careeraddict.com/post/113306626
Procurement Engineer
Posted on May 28, 2026 by CV-Library
Wallingford, Oxfordshire, United Kingdom
Engineering
Immediate Start
£26 - £50 Hourly
Contract/Project
Job Title: Procurement Engineer
Location: Eynsham, Oxfordshire
Contract Length: 12 Months (FTC)
Hourly Rate: £26.00 – £40.00 per hour
Job Purpose
To serve as a technical-commercial liaison during a critical supplier onboarding phase. This role ensures that MRI magnet components are optimized for cost and manufacturing without sacrificing the high-performance standards required by Siemens Healthineers.
Responsibilities
*
Supplier Onboarding: "Hit the ground running" with a new supplier integration, ensuring they meet technical and cost specifications from day one.
*
Stakeholder Mediation: Act as the "translator" between R&D designers, engineers, and external suppliers to balance Cost, Quality, and Technical Performance.
*
Cost Driver Analysis: Identify exactly where costs sit within manufacturing techniques (machining, fabrication, etc.) and challenge stakeholders to optimize them.
*
Tactical Procurement: Drive the "Design for Manufacture" (DfM) process to ensure newly designed components are commercially viable before purchase.
*
Travel: Execute up to 20% travel (domestic/international) to visit supplier sites and ensure alignment.
About You
*
The Hybrid Profile: You possess a rare blend of Mechanical Engineering knowledge and Commodity Management experience.
*
Qualified: HNC or BEng in a relevant engineering discipline.
*
Technically Fluent: You can hold your own in a room full of R&D designers, but also pivot to negotiate cost drivers with a supplier.
*
Agile: Ready to jump into an active project immediately; you don't need hand-holding to understand manufacturing blueprints or supply chain workflows
Location: Eynsham, Oxfordshire
Contract Length: 12 Months (FTC)
Hourly Rate: £26.00 – £40.00 per hour
Job Purpose
To serve as a technical-commercial liaison during a critical supplier onboarding phase. This role ensures that MRI magnet components are optimized for cost and manufacturing without sacrificing the high-performance standards required by Siemens Healthineers.
Responsibilities
*
Supplier Onboarding: "Hit the ground running" with a new supplier integration, ensuring they meet technical and cost specifications from day one.
*
Stakeholder Mediation: Act as the "translator" between R&D designers, engineers, and external suppliers to balance Cost, Quality, and Technical Performance.
*
Cost Driver Analysis: Identify exactly where costs sit within manufacturing techniques (machining, fabrication, etc.) and challenge stakeholders to optimize them.
*
Tactical Procurement: Drive the "Design for Manufacture" (DfM) process to ensure newly designed components are commercially viable before purchase.
*
Travel: Execute up to 20% travel (domestic/international) to visit supplier sites and ensure alignment.
About You
*
The Hybrid Profile: You possess a rare blend of Mechanical Engineering knowledge and Commodity Management experience.
*
Qualified: HNC or BEng in a relevant engineering discipline.
*
Technically Fluent: You can hold your own in a room full of R&D designers, but also pivot to negotiate cost drivers with a supplier.
*
Agile: Ready to jump into an active project immediately; you don't need hand-holding to understand manufacturing blueprints or supply chain workflows
Reference: 225168821
Share this job:
Alert me to jobs like this:
Amplify your job search:
Expert career advice
Increase interview chances with our downloads and specialist services.
Visit Blog