Senior Electrical Engineer
Posted on May 21, 2026 by CV-Library
Surrey, United Kingdom
Engineering
Immediate Start
£50 - £60 Hourly
Contract/Project
IMMEDIATE START, OUTSIDE IR35 CONTRACT - Senior Electrical Engineer
I’m in search of a contract Senior Electrical Engineer who can deliver the detailed electrical design for a containerised ammonia cracker system, supporting safe, reliable, and standards-compliant operation within a modular container environment.
The scope of work includes development of the overall electrical architecture, load calculations, and power distribution design, including single line diagrams, protection philosophy, cable sizing, and equipment specification (switchgear, distribution boards, UPS, and associated systems). The contractor shall design and integrate control systems, including PLC hardware selection, I/O definitions, and communication networks, ensuring full compatibility with process and instrumentation requirements.
The work shall address hazardous area requirements associated with hydrogen, including equipment selection (ATEX/IECEx where required), area classification support, intrinsic safety design, and appropriate segregation and grounding. Design of earthing, bonding, and lightning protection systems shall also be included.
The contractor shall produce all the required electrical layouts for the containerised installation, including lighting, HVAC power integration, cable routing, and space constraints. All designs must consider thermal management, manufacturability, and maintainability.
Deliverables include design basis documentation, load lists, single line diagrams, detailed wiring diagrams, control cabinet layouts, cable schedules, and supporting calculations (e.g., cable sizing, fault levels, protection coordination). The contractor will also support testing and commissioning phases through preparation of electrical FAT/SAT documentation and technical queries.
Work shall comply with applicable standards (IEC, BS 7671, IEC 60204, IEC 60079, etc.) and be coordinated closely with process, mechanical, and safety disciplines.
Familiarity with Siemens PLCs and SolidWorks Electrical are desired but not essential.
The work will require attendance onsite when required and is expected to be completed within a six month period, although this may extend.
If you are capable of the above and interested, please message me for a call back, or call (phone number removed)
I’m in search of a contract Senior Electrical Engineer who can deliver the detailed electrical design for a containerised ammonia cracker system, supporting safe, reliable, and standards-compliant operation within a modular container environment.
The scope of work includes development of the overall electrical architecture, load calculations, and power distribution design, including single line diagrams, protection philosophy, cable sizing, and equipment specification (switchgear, distribution boards, UPS, and associated systems). The contractor shall design and integrate control systems, including PLC hardware selection, I/O definitions, and communication networks, ensuring full compatibility with process and instrumentation requirements.
The work shall address hazardous area requirements associated with hydrogen, including equipment selection (ATEX/IECEx where required), area classification support, intrinsic safety design, and appropriate segregation and grounding. Design of earthing, bonding, and lightning protection systems shall also be included.
The contractor shall produce all the required electrical layouts for the containerised installation, including lighting, HVAC power integration, cable routing, and space constraints. All designs must consider thermal management, manufacturability, and maintainability.
Deliverables include design basis documentation, load lists, single line diagrams, detailed wiring diagrams, control cabinet layouts, cable schedules, and supporting calculations (e.g., cable sizing, fault levels, protection coordination). The contractor will also support testing and commissioning phases through preparation of electrical FAT/SAT documentation and technical queries.
Work shall comply with applicable standards (IEC, BS 7671, IEC 60204, IEC 60079, etc.) and be coordinated closely with process, mechanical, and safety disciplines.
Familiarity with Siemens PLCs and SolidWorks Electrical are desired but not essential.
The work will require attendance onsite when required and is expected to be completed within a six month period, although this may extend.
If you are capable of the above and interested, please message me for a call back, or call (phone number removed)
Reference: 225141540
https://jobs.careeraddict.com/post/113268557
Senior Electrical Engineer
Posted on May 21, 2026 by CV-Library
Surrey, United Kingdom
Engineering
Immediate Start
£50 - £60 Hourly
Contract/Project
IMMEDIATE START, OUTSIDE IR35 CONTRACT - Senior Electrical Engineer
I’m in search of a contract Senior Electrical Engineer who can deliver the detailed electrical design for a containerised ammonia cracker system, supporting safe, reliable, and standards-compliant operation within a modular container environment.
The scope of work includes development of the overall electrical architecture, load calculations, and power distribution design, including single line diagrams, protection philosophy, cable sizing, and equipment specification (switchgear, distribution boards, UPS, and associated systems). The contractor shall design and integrate control systems, including PLC hardware selection, I/O definitions, and communication networks, ensuring full compatibility with process and instrumentation requirements.
The work shall address hazardous area requirements associated with hydrogen, including equipment selection (ATEX/IECEx where required), area classification support, intrinsic safety design, and appropriate segregation and grounding. Design of earthing, bonding, and lightning protection systems shall also be included.
The contractor shall produce all the required electrical layouts for the containerised installation, including lighting, HVAC power integration, cable routing, and space constraints. All designs must consider thermal management, manufacturability, and maintainability.
Deliverables include design basis documentation, load lists, single line diagrams, detailed wiring diagrams, control cabinet layouts, cable schedules, and supporting calculations (e.g., cable sizing, fault levels, protection coordination). The contractor will also support testing and commissioning phases through preparation of electrical FAT/SAT documentation and technical queries.
Work shall comply with applicable standards (IEC, BS 7671, IEC 60204, IEC 60079, etc.) and be coordinated closely with process, mechanical, and safety disciplines.
Familiarity with Siemens PLCs and SolidWorks Electrical are desired but not essential.
The work will require attendance onsite when required and is expected to be completed within a six month period, although this may extend.
If you are capable of the above and interested, please message me for a call back, or call (phone number removed)
I’m in search of a contract Senior Electrical Engineer who can deliver the detailed electrical design for a containerised ammonia cracker system, supporting safe, reliable, and standards-compliant operation within a modular container environment.
The scope of work includes development of the overall electrical architecture, load calculations, and power distribution design, including single line diagrams, protection philosophy, cable sizing, and equipment specification (switchgear, distribution boards, UPS, and associated systems). The contractor shall design and integrate control systems, including PLC hardware selection, I/O definitions, and communication networks, ensuring full compatibility with process and instrumentation requirements.
The work shall address hazardous area requirements associated with hydrogen, including equipment selection (ATEX/IECEx where required), area classification support, intrinsic safety design, and appropriate segregation and grounding. Design of earthing, bonding, and lightning protection systems shall also be included.
The contractor shall produce all the required electrical layouts for the containerised installation, including lighting, HVAC power integration, cable routing, and space constraints. All designs must consider thermal management, manufacturability, and maintainability.
Deliverables include design basis documentation, load lists, single line diagrams, detailed wiring diagrams, control cabinet layouts, cable schedules, and supporting calculations (e.g., cable sizing, fault levels, protection coordination). The contractor will also support testing and commissioning phases through preparation of electrical FAT/SAT documentation and technical queries.
Work shall comply with applicable standards (IEC, BS 7671, IEC 60204, IEC 60079, etc.) and be coordinated closely with process, mechanical, and safety disciplines.
Familiarity with Siemens PLCs and SolidWorks Electrical are desired but not essential.
The work will require attendance onsite when required and is expected to be completed within a six month period, although this may extend.
If you are capable of the above and interested, please message me for a call back, or call (phone number removed)
Reference: 225141540
Share this job:
Alert me to jobs like this:
Amplify your job search:
Expert career advice
Increase interview chances with our downloads and specialist services.
Visit Blog