Tig Welder
Posted on May 18, 2026 by CV-Library
South Lancing, West Sussex, United Kingdom
Engineering
Immediate Start
£15 - £18 Hourly
Temporary
Our engineering client is looking for a specialist TIG welder to work in their Lancing manufacturing facility.
The work will mainly involve welding tubular material using the TIG welding process (GTAW). Most of the applications are architectural, so it is very important to be able to work to very high finish standards. Most of the work will be using stainless tube with wall thicknesses ranging from 1.5 to 3mm.
Salary would be dependent on results from an in house welding test and experience, with the higher £18 rate requiring someone to act as a welding team leader/supervisor with additional responsibilities. It is therefore important that you could demonstrate during a weld test that you could produce quality welds on tubular material using the TIG welding process. The material could be stainless or aluminium.
The job is initially for a twelve week period and then would go permanent after a successful trial period. The standard working week is 40 hours, 8.00 a.m to 5.00 p.m. Monday to Thursday and 8.00 a.m. to 2.00 p.m. Friday’s. 1 hr for lunch break 1-2 p.m. ¼ hr breaks a.m. & p.m.
Overtime after minimum of 40 hrs paid at Time and a Half.
Please click on the link below to apply or contact me should you have any questions. Thanks
The work will mainly involve welding tubular material using the TIG welding process (GTAW). Most of the applications are architectural, so it is very important to be able to work to very high finish standards. Most of the work will be using stainless tube with wall thicknesses ranging from 1.5 to 3mm.
Salary would be dependent on results from an in house welding test and experience, with the higher £18 rate requiring someone to act as a welding team leader/supervisor with additional responsibilities. It is therefore important that you could demonstrate during a weld test that you could produce quality welds on tubular material using the TIG welding process. The material could be stainless or aluminium.
The job is initially for a twelve week period and then would go permanent after a successful trial period. The standard working week is 40 hours, 8.00 a.m to 5.00 p.m. Monday to Thursday and 8.00 a.m. to 2.00 p.m. Friday’s. 1 hr for lunch break 1-2 p.m. ¼ hr breaks a.m. & p.m.
Overtime after minimum of 40 hrs paid at Time and a Half.
Please click on the link below to apply or contact me should you have any questions. Thanks
Reference: 221020059
https://jobs.careeraddict.com/post/113246693
Tig Welder
Posted on May 18, 2026 by CV-Library
South Lancing, West Sussex, United Kingdom
Engineering
Immediate Start
£15 - £18 Hourly
Temporary
Our engineering client is looking for a specialist TIG welder to work in their Lancing manufacturing facility.
The work will mainly involve welding tubular material using the TIG welding process (GTAW). Most of the applications are architectural, so it is very important to be able to work to very high finish standards. Most of the work will be using stainless tube with wall thicknesses ranging from 1.5 to 3mm.
Salary would be dependent on results from an in house welding test and experience, with the higher £18 rate requiring someone to act as a welding team leader/supervisor with additional responsibilities. It is therefore important that you could demonstrate during a weld test that you could produce quality welds on tubular material using the TIG welding process. The material could be stainless or aluminium.
The job is initially for a twelve week period and then would go permanent after a successful trial period. The standard working week is 40 hours, 8.00 a.m to 5.00 p.m. Monday to Thursday and 8.00 a.m. to 2.00 p.m. Friday’s. 1 hr for lunch break 1-2 p.m. ¼ hr breaks a.m. & p.m.
Overtime after minimum of 40 hrs paid at Time and a Half.
Please click on the link below to apply or contact me should you have any questions. Thanks
The work will mainly involve welding tubular material using the TIG welding process (GTAW). Most of the applications are architectural, so it is very important to be able to work to very high finish standards. Most of the work will be using stainless tube with wall thicknesses ranging from 1.5 to 3mm.
Salary would be dependent on results from an in house welding test and experience, with the higher £18 rate requiring someone to act as a welding team leader/supervisor with additional responsibilities. It is therefore important that you could demonstrate during a weld test that you could produce quality welds on tubular material using the TIG welding process. The material could be stainless or aluminium.
The job is initially for a twelve week period and then would go permanent after a successful trial period. The standard working week is 40 hours, 8.00 a.m to 5.00 p.m. Monday to Thursday and 8.00 a.m. to 2.00 p.m. Friday’s. 1 hr for lunch break 1-2 p.m. ¼ hr breaks a.m. & p.m.
Overtime after minimum of 40 hrs paid at Time and a Half.
Please click on the link below to apply or contact me should you have any questions. Thanks
Reference: 221020059
Share this job:
Alert me to jobs like this:
Amplify your job search:
Expert career advice
Increase interview chances with our downloads and specialist services.
Visit Blog